Inductor in Dumble SSS amps
Moderators: pompeiisneaks, Colossal
Re: Inductor in Dumble SSS amps
Thanks for the link Martin, I never would have found that.
Yours Sincerely
Mark Abbott
Mark Abbott
Re: Inductor in Dumble SSS amps
Thanks you for pointing out that there are errors Mabtuk. Is there a diagram without errors on this site?
Yours Sincerely
Mark Abbott
Mark Abbott
Re: Inductor in Dumble SSS amps
I don't really know. There are some obvious mistakes like the volume pot which should be 1M instead of 100k or the 1k resistors at the mix cathode followers which should be 100k each. There are other less obvious ones that could also be different ways of doing the design. But the real case I think is to know how many errors since after seen a few of them it is difficult to trust the schematic anymore.
Re: Inductor in Dumble SSS amps
So how many variations have been recorded here?But the real case I think is to know how many errors since after seen a few of them it is difficult to trust the schematic anymore.
I'm wondering how close to the mark are the circuits and variations?
Yours Sincerely
Mark Abbott
Mark Abbott