Inductor in Dumble SSS amps

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

Mark
Posts: 2957
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: Inductor in Dumble SSS amps

Post by Mark »

Thanks for the link Martin, I never would have found that.
Yours Sincerely

Mark Abbott
mabruk
Posts: 16
Joined: Wed May 09, 2012 8:57 pm

Re: Inductor in Dumble SSS amps

Post by mabruk »

Mark wrote: Fri Sep 29, 2017 5:06 am Thanks for the link Martin, I never would have found that.
That one is rather known but it contains errors
Mark
Posts: 2957
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: Inductor in Dumble SSS amps

Post by Mark »

Thanks you for pointing out that there are errors Mabtuk. Is there a diagram without errors on this site?
Yours Sincerely

Mark Abbott
mabruk
Posts: 16
Joined: Wed May 09, 2012 8:57 pm

Re: Inductor in Dumble SSS amps

Post by mabruk »

Mark wrote: Fri Sep 29, 2017 7:19 am Thanks you for pointing out that there are errors Mabtuk. Is there a diagram without errors on this site?
I don't really know. There are some obvious mistakes like the volume pot which should be 1M instead of 100k or the 1k resistors at the mix cathode followers which should be 100k each. There are other less obvious ones that could also be different ways of doing the design. But the real case I think is to know how many errors since after seen a few of them it is difficult to trust the schematic anymore.
Mark
Posts: 2957
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: Inductor in Dumble SSS amps

Post by Mark »

But the real case I think is to know how many errors since after seen a few of them it is difficult to trust the schematic anymore.
So how many variations have been recorded here?

I'm wondering how close to the mark are the circuits and variations?
Yours Sincerely

Mark Abbott
Post Reply