Hi All,
Last night I discovered, through a customer, that I have had a bug in my FET pcb for a year.
It does work and does not break (for the time being), but does not match the design and may give switching pops when used with a relay.
The Input Fet PCB normally runs through the 100pF // 1M to gate FET. Now the input is shorted by entrance directly to the gate.
A quick solution is to cut the trace at the red X, as in the photo attachment, but of course I can send you an improved version free of charge, this can take a week or 2/3 due to re-ordering.
I tried to reach all customers by email or pm, but I deleted some messages because my box was full a few times.
So did you order and want a updated one? pls shoot me a email or pm.
Erwin
Steel String Singer/ ODS Fet PCB
Moderators: pompeiisneaks, Colossal
- erwin_ve
- Posts: 1727
- Joined: Fri Jan 25, 2008 8:06 am
- Location: Dordrecht, Netherlands
- Contact:
2 others liked this
Steel String Singer/ ODS Fet PCB
You do not have the required permissions to view the files attached to this post.