HEad cabs available

Funkalicousgroove · Post by **Funkalicousgroove** » Tue Oct 02, 2007 10:15 pm

Hey all,

I have 8 head cabs available, 5 black/black, 3 Rough blonde/oxblood.

The cab guy built them a bit too tall, and I don't want them. He's looking to move them quick @ $125ea send me a pm if you are interested, they fit my chassis.

yeahyeah · Post by **yeahyeah** » Tue Oct 02, 2007 10:24 pm

PM sent!

dobbhill · Post by **dobbhill** » Tue Oct 02, 2007 10:51 pm

PM'd

D

odourboy · Post by **odourboy** » Wed Oct 03, 2007 12:02 am

Got a pic (or something close)? Are they complete with feet & handle? Is there a back cover?

tele_player · Post by **tele_player** » Wed Oct 03, 2007 12:03 am

PM'd, I'm good for 1,2 or 3.

RJ Guitars · Post by **RJ Guitars** » Wed Oct 03, 2007 1:56 am

Funk,

Can I have some dimensions? I need something that will accomodate a 19.25 x 7.75 x 2 inch chassis

rj

heisthl · Post by **heisthl** » Wed Oct 03, 2007 2:38 am

the front to back dimension is 10" a little too deep for your chassis - the other measurements are about right.

Funkalicousgroove · Post by **Funkalicousgroove** » Wed Oct 03, 2007 4:46 pm

THe cabs are 100% complete, you just need to mount the aluminum strip, which I will include because I am such a fine fellow

They are set up for my chassis and have mounting holes pre-drilled, you just have to find them under the tolex!!

It is best to mount your chassis before you fit the aluminum strip, then remove your chassis before you screw the strip down.

You can use #4 or #6 countersink wood screws to hold the strip down.

They are 10" deep, 10 3/8" tall and 20 3/4"(give or take) wide.

My chassis is only 19", the other 1/4" makes room for tolex, and a bit of wiggle room(like the real ones).

The cabs are the same as the pics of amps on my site www.bludotone.com

Funkalicousgroove · Post by **Funkalicousgroove** » Wed Oct 03, 2007 4:51 pm

RJ,

my chassis are 2.5" tall, so you'd have a half an inch gap to fill.

If you want to modify one I have one out of an older batch that you can have for $85 + s&H, but it will require much modification. It is rough blonde/oxblood.

tele_player · Post by **tele_player** » Wed Oct 03, 2007 6:05 pm

How much 'a bit too tall' are these cabs? Are they 10-3/8", or is that the dimension you really wanted them to be?

Funkalicousgroove · Post by **Funkalicousgroove** » Thu Oct 04, 2007 3:33 pm

they were supposed to be 10 x 10, they came to me at 10 3/8 x 10.

heisthl · Post by **heisthl** » Thu Oct 04, 2007 4:04 pm

Funkalicousgroove wrote:they were supposed to be 10 x 10, they came to me at 10 3/8 x 10.

Horrors!

Stanz · Post by **Stanz** » Thu Oct 04, 2007 5:25 pm

Funkalicousgroove · Post by **Funkalicousgroove** » Thu Oct 04, 2007 5:55 pm

I get that it's not that big of a deal, but it's also not what I ordered, and not the first time it's happened, and not the only issue I've had. This was just the straw that broke the camel's back!

Funkalicousgroove · Post by **Funkalicousgroove** » Thu Oct 04, 2007 6:08 pm

The cabs are all gone fellas, I am placing an order for some really sweet ones that will be about $230.00 in your choice of colors, or around $500 for your choice of suede.

if you want to get in on one delivery time is about 45 days.

The Amp Garage

HEad cabs available

HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available

Re: HEad cabs available