Tweedle Dee build
Moderators: pompeiisneaks, Colossal
Tweedle Dee build
Here is presented one build with great result, not so strictly following HADs tweaks of 5E3..
My friends build, with little bit help of me..
Build is around this pcb which i have made few years ago..pcb is accepting NFB to cathode of V2..
PT is DIY, OT is Piemme Elektra Italy, some Dralorics CF and SMA metal films here and there, Koa Speer 100k for anodes..First time used 22uF Bipolar caps for cathodes, like in Hi Fi, and Speaker crossovers
My friends build, with little bit help of me..
Build is around this pcb which i have made few years ago..pcb is accepting NFB to cathode of V2..
PT is DIY, OT is Piemme Elektra Italy, some Dralorics CF and SMA metal films here and there, Koa Speer 100k for anodes..First time used 22uF Bipolar caps for cathodes, like in Hi Fi, and Speaker crossovers
You do not have the required permissions to view the files attached to this post.
Re: Tweedle Dee build
You do not have the required permissions to view the files attached to this post.
Re: Tweedle Dee build
You do not have the required permissions to view the files attached to this post.
Re: Tweedle Dee build
You do not have the required permissions to view the files attached to this post.
Re: Tweedle Dee build
box pics..
You do not have the required permissions to view the files attached to this post.
Re: Tweedle Dee build
some local find imitation of leather used for the cab.. PVA express glue , side per side, slow process, cable from the old headphones for piping..
You do not have the required permissions to view the files attached to this post.
Re: Tweedle Dee build
now about the sound and tweaking tommorow..
here are clips from finished amp.. there is no tube rectifier, and added NFB, speakers are Jensen C12n, and Jensen Tornado Neodymium,
https://www.youtube.com/watch?v=YnjfHaAxRxE
https://www.youtube.com/watch?v=wMwlGUlDivM
here are clips from finished amp.. there is no tube rectifier, and added NFB, speakers are Jensen C12n, and Jensen Tornado Neodymium,
https://www.youtube.com/watch?v=YnjfHaAxRxE
https://www.youtube.com/watch?v=wMwlGUlDivM
Re: Tweedle Dee build
i drew it acc to orig layout and made few pcs..
Re: Tweedle Dee build
Thanks for your reply, the PCB looks good. I thought it might have been the commercially available PCB’s.
https://www.aaelectronicspcb.com/
https://www.aaelectronicspcb.com/
Yours Sincerely
Mark Abbott
Mark Abbott
Re: Tweedle Dee build
only one remained but you are too far?
Re: Tweedle Dee build
few more pcs:
You do not have the required permissions to view the files attached to this post.
Re: Tweedle Dee build
last state after the tweaks:
You do not have the required permissions to view the files attached to this post.
Re: Tweedle Dee build
Mods/ drifted from HAD:
SS rectifier - with care that voltages are correct
Power tubes screen resistors 470R
Power tubes cathode - 300R
3P NFB switch
Pre PI Master volume (tried trainwreck MV but it was horrible)
Normal channel – coupling cap – 4,7nF
Cathode R - 2,7K
Anode R - 220K
Bypass cap - 0,68uF
Added HI /LO inputs
Bright channel – coupling cap 10nF
Grill vents are to be printed and installed soon
SS rectifier - with care that voltages are correct
Power tubes screen resistors 470R
Power tubes cathode - 300R
3P NFB switch
Pre PI Master volume (tried trainwreck MV but it was horrible)
Normal channel – coupling cap – 4,7nF
Cathode R - 2,7K
Anode R - 220K
Bypass cap - 0,68uF
Added HI /LO inputs
Bright channel – coupling cap 10nF
Grill vents are to be printed and installed soon
-
- Posts: 24
- Joined: Mon Sep 09, 2013 1:32 am
- Location: East Central FL