Hello, I am going way back on this question. The main filtering everyone including myself seems to be using are the two 47uf in series per the schematic in the file section. However, I found a real early Brandon post where he stated that the first two caps were 100uf. So I am wondering, did we decide somewhere along the way that 25(ish)uf total filtering sounded better than the 50uf? I am assuming that Brandon was the one who was in that original Dumbleator.
CW
Dumbleator Filtering
Moderators: pompeiisneaks, Colossal
-
Charlie Wilson
- Posts: 1104
- Joined: Thu Jan 23, 2014 7:32 pm
- Location: Laguna Niguel, California
Dumbleator Filtering
You do not have the required permissions to view the files attached to this post.
-
tylerbaster
- Posts: 26
- Joined: Mon Feb 13, 2006 3:18 pm
Re: Dumbleator Filtering
Hello Charlie,
The first two caps of the Dumbelator in the photo I posted are 47 micro as shown in the schematic Brandon posted
https://ampgarage.com/forum/viewtopic.p ... 893#p53893
Tyler
The first two caps of the Dumbelator in the photo I posted are 47 micro as shown in the schematic Brandon posted
https://ampgarage.com/forum/viewtopic.p ... 893#p53893
Tyler
-
Charlie Wilson
- Posts: 1104
- Joined: Thu Jan 23, 2014 7:32 pm
- Location: Laguna Niguel, California
Re: Dumbleator Filtering
Thank you sir. Yeah I have built a few Dumbleators with the 47uf caps with good results. Not sure why I started to wonder about that other than seeing Brandons original post where he stated that they were 100uf. However, that post was almost 20 years ago.
CW
CW