Chassis Interest?

Funkalicousgroove · Post by **Funkalicousgroove** » Thu Feb 16, 2006 9:43 pm

I am getting ready to do another run of chassis here in the next month or two, and I want to get a gauge of who all is interested.

These chassis are Laser punched .10 Aluminum, with Welded Corners and PEM inserts for mounting. I then have them Industrially powder-coated(Outside only) and Screen printed with everything but Logo's. I have one of the earlier GDS chassis like the one I saw go for $135 on this site and I will tell you that My chassis are MUCH nicer, they sit square, the holes are all spaced correctly, and the paint doesn't flake off or scratch easily. There are a few of you out there that got some of the last run, and I'm sure you can vouch for the quality.

Funkalicousgroove · Post by **Funkalicousgroove** » Thu Feb 16, 2006 10:48 pm

oh yeah, These will be priced ar $150 USD Including mounting hardware (Big whoop!!)

Robert · Post by **Robert** » Thu Feb 16, 2006 10:58 pm

Funkalicousgroove speaks the truth. I purchased one of his chassis's for my build and couldn't be happier with the quality. Nice heavy aluminum, consistent powder coating application and nice, detailed screen printing. The edges were all nicely welded with smooth corners. You guys won't be disappointed.

Chad · Post by **Chad** » Thu Feb 16, 2006 11:03 pm

I'll have to agree,Very nice. I got mine last Sept. and was very happy with the workmanship. Top quality indeed

.

v00d00blues79 · Post by **v00d00blues79** » Thu Feb 16, 2006 11:33 pm

I'd be definitely interested.

Andy

Funkalicousgroove · Post by **Funkalicousgroove** » Thu Feb 16, 2006 11:46 pm

I order them in batches of 25, and need to sell at least 10 to make it cost effective, once I get 10-15 interested folks I'll go on it.

Chris G · Post by **Chris G** » Fri Feb 17, 2006 1:38 am

HI Funk,
Is the power tranny a through mount ? or is it uncut????
Thanks!!!!
Chris

HiGain · Post by **HiGain** » Fri Feb 17, 2006 3:42 am

Count me in for one.
Thanks!
Jake

tonelab2 · Post by **tonelab2** » Fri Feb 17, 2006 7:13 am

I've still got 3 screen printed chassis' sitting under the bench I had made up 2 years ago, plus a bangkok special, but still haven't gotten around to starting one as yet.
Maybe next week I'll get the time. not enough hours in the day.

toneman · Post by **toneman** » Fri Feb 17, 2006 4:44 pm

Me too, Me two

I don't mind either way on laydown or stand up. Maybe W/O the D name though, case the HAD hammer comes down.

Funkalicousgroove · Post by **Funkalicousgroove** » Fri Feb 17, 2006 9:38 pm

Would you all prefer Lay down or stand-up pt mounting?

v00d00blues79 · Post by **v00d00blues79** » Fri Feb 17, 2006 10:26 pm

I personally prefer laydown if i'm not cutting the hole. =)

ampdoc1 · Post by **ampdoc1** » Tue Feb 21, 2006 3:51 am

Put me down for one. I bought one of the Thai chassis and it's not bad. But your finish looks exceptional.

DEH

BobW · Post by **BobW** » Wed Feb 22, 2006 5:21 am

I'm also interested in a chassis.

Leo · Post by **Leo** » Thu Feb 23, 2006 9:56 am

I'm interested in a chassis if there isn't a hole cut for the X-former.

The Amp Garage

Chassis Interest?

Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Re: Chassis Interest?

Amp chassis