Ok. I'm starting to work on the BOM. My questions to you all is this:
1w Carbon Film for the circuit with 3-5w Metal Film for the PS?
Tone stack/Coupling Caps... what is the preferred brand/model?
Transformers? Make/Model...
Choke or Resistor?
Thanks,
Andy
B.O.M. Ideas...
Moderators: pompeiisneaks, Colossal
-
- Posts: 345
- Joined: Sun Mar 06, 2005 3:41 am
- Contact:
Re: B.O.M. Ideas...
I've used both 1/2 watt metal films and carbons and I honestly don't hear the difference.v00d00blues79 wrote:Ok. I'm starting to work on the BOM. My questions to you all is this:
1w Carbon Film for the circuit with 3-5w Metal Film for the PS?
I like the PS series Orange drops, although Mallory 150's sound about the same.Tone stack/Coupling Caps... what is the preferred brand/model?
My output xformers are Mojotone Bassman type, I haven't tried others so I can't comment. The power xformers I've used have been Hammond, Marshall replacement and Fender replacement from AES. All seem to work fine. The Hammond is lower voltage for my 6V6 version.Transformers? Make/Model...
Both, switchable.Choke or Resistor?
Thanks,
Andy