FREE!!! Chassis drawing. Make buds with your local shop dude
Moderators: pompeiisneaks, Colossal
FREE!!! Chassis drawing. Make buds with your local shop dude
Free chassis drawing. Use it however one sees fit. Disregard my previous posting about fair use. It's FREE!
Build an amplifier or an amplifier empire from it.
It's all good.
Henry man figure it out. It ain't far off from a perfectly great chassis.
A few revisions here or there, some inset sides, a little welding, powder coat and silkscreen or slap a faceplate on it. Viola!
If Howard ever reads this forum well all I can say is I am sorry if all this hurts your heart. I think your likely a kinder dude then folks ever give you credit for and you have done me no harm so I do feel some pangs of guilt from time to time.
However the seas are high and the wind blowing hard and this bootleg vessel won't steer itself.
Enjoy the peoples chassis.
I mean enjoy the chassis people.
Yarrr!! .....damn no eyepatch smiley?
Build an amplifier or an amplifier empire from it.
It's all good.
Henry man figure it out. It ain't far off from a perfectly great chassis.
A few revisions here or there, some inset sides, a little welding, powder coat and silkscreen or slap a faceplate on it. Viola!
If Howard ever reads this forum well all I can say is I am sorry if all this hurts your heart. I think your likely a kinder dude then folks ever give you credit for and you have done me no harm so I do feel some pangs of guilt from time to time.
However the seas are high and the wind blowing hard and this bootleg vessel won't steer itself.
Enjoy the peoples chassis.
I mean enjoy the chassis people.
Yarrr!! .....damn no eyepatch smiley?
Last edited by ampdork on Mon Jun 30, 2008 6:31 am, edited 1 time in total.
- skyboltone
- Posts: 2287
- Joined: Wed May 10, 2006 7:02 pm
- Location: Sparks, NV, where nowhere looks like home.
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
Cool and everything dork, but you forgot to post the darn thing!
The Last of the World's Great Human Beings
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
OK file not allowed.
Try and remove the .mp3 tag
Try and remove the .mp3 tag
You do not have the required permissions to view the files attached to this post.
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
Try the file now. Remove the .mp3 tag and it ought to work.
Will also need a DXF reader or software that can open it. There are free dxf readers out there but I do not know what they are...
GIY..... google it yourself
Yo ho ho!!!
Will also need a DXF reader or software that can open it. There are free dxf readers out there but I do not know what they are...
GIY..... google it yourself
Yo ho ho!!!
- skyboltone
- Posts: 2287
- Joined: Wed May 10, 2006 7:02 pm
- Location: Sparks, NV, where nowhere looks like home.
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
I replaced the .mp3 with .dxf and tried to yank it open with Visio (which will open dxf files) but it failed. But this was the free trial version. I have the full paid for version on my other computer. I'll move it over there with the thumb drive after while and see what happens.ampdork wrote:Try the file now. Remove the .mp3 tag and it ought to work.
Will also need a DXF reader or software that can open it. There are free dxf readers out there but I do not know what they are...
GIY..... google it yourself
Yo ho ho!!!
The Last of the World's Great Human Beings
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
How do you get it to dl? I just tried and my browsewr keeps trying to play in with QT....LOL
Save as seems to not save the file.
I'll post it elsewhere and link asap.
Save as seems to not save the file.
I'll post it elsewhere and link asap.
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
In Winblows: Right-click the link>save as. Rename it in the same operation to .dxf. It opened fine for me. You can get a free CAD prod here:ampdork wrote:How do you get it to dl? I just tried and my browsewr keeps trying to play in with QT....LOL
Save as seems to not save the file.
I'll post it elsewhere and link asap.
http://www.cadstd.com/
Thanks for the meticulous work Ampdork!
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
I saved the file as .dxf and it opened fine in Viso 2003 as dxf.
Thank you for your contribution.
RB
Thank you for your contribution.
RB
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
I saved the file as .dxf and it opened fine in Viso 2003 as dxf.
Thank you for your contribution.
RB
Thank you for your contribution.
RB
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
Thanks for posting this, I can open it in Visio but it might as well be a JPEG - I can't manipulate any of the shapes. Whine Whine Whine
Former owner of Music Mechanix
www.RedPlateAmps.com
www.RedPlateAmps.com
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
Could it be reposted, without any known file ext.??
or something silly like . aaa...................?
My browsers refuse to download it, and QT can't play it....??
BTW- any reason why a dxf-file can't be uploaded??
or something silly like . aaa...................?
My browsers refuse to download it, and QT can't play it....??
BTW- any reason why a dxf-file can't be uploaded??
Last edited by Aurora on Mon Jun 30, 2008 12:00 pm, edited 1 time in total.
-
- Posts: 79
- Joined: Tue Jan 31, 2006 9:31 pm
- Contact:
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
Can you just convert it to a pdf or make a gif or jpg???
Thanks!
Thanks!
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
If QuickTime tries to play it, just do a Save Page As on that QT open and you should be able to save the file as is - remember to remove the .mp3 tag.
Wife: How many amps do you need?
Me: Just one more...
Me: Just one more...
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
all I get in Visio is one square in the middle of the sheet ....?????
Re: FREE!!! Chassis drawing. Make buds with your local shop dude
This is who makes all of our chassis.. You can download there free CAD 3D software.. You can design the chassis and save in dsx. format...I believe!! You can submit the chassis in all differant metals powder coating and even silk screening.. It will even spit out a price and turn around time when your done..
http://www.emachineshop.com/download/index.htm
http://www.emachineshop.com/download/index.htm
You do not have the required permissions to view the files attached to this post.