SSS #002 REDRAW DRAFT

[martin manning]

Did I get it correct?

Would you have bet money that you did? ;^)

[GAStan]

Did I get it correct?

Would you have bet money that you did? ;^)

Would I have won?

[martin manning]

Would I have won? :wink:

You have a point there :^) To me, one component being in series with another means they have the same current.

[GAStan]

You are correct. It took me reading it several times to catch on-if I did. The "Did I get it correct?" was actually meant for Ryan

[rccolgan]

Hi Ryan, it's this. As drawn vs. the red. Your layout shows the red.

oh!! That is much clearer.. Thanks, Martin! I apologize if I missed any communication about this discrepancy before. Looks like I'll need to try it in my amp and possibly update the layout

[martin manning]

No problem, and it basically reduces the output 1 dB if the feedback goes direct to the grid. Other than that, I don't know.

[rccolgan]

No problem, and it basically reduces the output 1 dB if the feedback goes direct to the grid. Other than that, I don't know.

Thanks, Martin! Always a cordial interaction with you that I continue to appreciate!

I updated the layout with this correction. Fun fact: I looked through my pictures and I had this arranged correctly at first and somewhere along the line I changed it to the incorrect way. Oh well. I'm glad it's proper again!

[ViperDoc]

Just noticing this traffic. Is my "redraw" draft correct, then, with respect to the Reverb input NFB? It looks like it is to me. Best.

[martin manning]

Yes, yours matches the hand-drawn schematic.