Head Cab Plans

[ChrisM]

Not my plans first off.

These are plans for a Ceriatone OTS. You will need to modify them slightly for a traditional ODS. Back cut out isn't correct, front needs a cutout and a few other minor things including dimensions.

Not a big deal though. I have never seen plans here for a ODS head cab so I figure these would be better than none.

I'll be building 2 or 3 of these head cabs in the near future. We'll see how it goes.

[kiwiandy]

Thanks! It would be great to see you cabs when you're done, too.

[ChrisM]

Your welcome!
Glad someone is semi interested in these head plans. There are none on the forum so I thought everyone here would be quite interested.

I will post my heads when done. Probably wont be for a while though.

[M Fowler]

Chris semi interested you have 67 downloads and one thank you which has become the norm around here lately.

Thank you.

There are guys that have plans but to get them you needed to pm them and I forgot who that was, not helpful I know.

[ChrisM]

If anyone does have other plans I would love to see them. I realize the ones I posted aren't the best but it would be nice to see others.

Mark if you ever remember who has them, or have some of your own, please PM me.

[tubedogsmith]

Chris, I doubt these will be any use to anyone but, here's some rough hand drawings I've sent one of my cab guys and they came out great.

[tubedogsmith]

Here's a pic of a couple cabs made with those drawings.

[ChrisM]

That is great! Thank you.

Not to be a pain here...
Now are these cabs true to HAD's cab dimensions?

[tubedogsmith]

I took pics of real dumble cabs and scaled these from them. Of course I allowed for the size of the chassis I used.

[ChrisM]

Which chassis were you using, if you don't mind me asking?

[tubedogsmith]

The black Natchanis '80's chassis went in both of those boxes. The handle isn't mounted yet in this pic.

[hywelg]

Heres a pic of my Ceriatone OTS. The plans referenced by the OP were mine and this is what it looks like.

[mlp-mx6]

Thanks for the drawings. I do not understand how the side can be 9.5" x 9.5", but the top is 10" deep. Wouldn't the side need to be 9.5" by 10"?

[hywelg]

My drawing is scale 1:1 so you can, if you have the means, print full size and scale off it. You will need to disable some of the layers otherwise there is too much detail showing

[odourboy]

Love the back panel detail!