#183 5th Generation ODS Skyliner. Layout/Schematic

Dumble schematics, designs, pictures. Only members may post files here.

Moderators: pompeiisneaks, Structo, mhuss, HeeBGB

talbany
Posts: 3265
Joined: Tue Mar 28, 2006 5:03 am
Location: Dumbleland

#183 5th Generation ODS Skyliner. Layout/Schematic

Post by talbany » Fri Nov 26, 2010 6:43 pm

A 5th generation #183 ODS with mid switch - 3 piece chassis,(wooden sides high plate no LNFB V1 Skyliner w/different script

Also a big thank you to Shad/ Quinn amps for all his help with the layout..without it it would not be possible..
Also Thanks to Jaysg for the attached Schematic

Good Luck with the builds everyone!!

WARNING!!..Before you do the build please make sure you have the latest version of the layout...Good Luck!!

Tony
You do not have the required permissions to view the files attached to this post.
Last edited by talbany on Mon Apr 11, 2011 8:47 pm, edited 12 times in total.
The laws of physics are the same on your bench as they are on Mr Dumbles

User avatar
M Fowler
Posts: 12998
Joined: Wed Jan 16, 2008 2:19 am
Location: Moorhead MN

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by M Fowler » Fri Nov 26, 2010 8:22 pm

Thanks Tony and Shad I appreciate your efforts.

Mark

stevlech
Posts: 209
Joined: Wed Jan 19, 2005 7:55 am

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by stevlech » Fri Nov 26, 2010 8:57 pm

Thank you, Tony/Shad.

User avatar
butwhatif
Posts: 539
Joined: Mon Dec 03, 2007 4:27 am
Location: upmi

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by butwhatif » Fri Nov 26, 2010 9:01 pm

Thanks Tony/Shad, Happy Thanksgiving Weekend--

User avatar
jaysg
Posts: 1198
Joined: Tue Feb 07, 2006 11:16 pm
Location: Sandy Eggo

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by jaysg » Fri Nov 26, 2010 9:22 pm

There's a schematic in this mess, isn't there? (I'm nowhere near my main PC, so I can't find anything I've saved.)

User avatar
dobbhill
Posts: 431
Joined: Sat Jan 22, 2005 12:04 am
Location: Louisiana

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by dobbhill » Sat Nov 27, 2010 3:09 pm

Thanks much for all the work!!

I find it odd that the Treble control is audio taper, and the bass and mid controls are linear...Backwards from convention methinks.
D
There are no stupid questions, just stupid people.......

Drumslinger
Posts: 369
Joined: Wed Nov 23, 2005 4:31 am
Location: USA

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by Drumslinger » Sat Nov 27, 2010 11:12 pm

Thanks again for the excellent work, Tony.

wescaster
Posts: 34
Joined: Sat Feb 14, 2009 11:51 pm
Location: Mt.Vernon Oregon

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by wescaster » Mon Feb 14, 2011 4:42 am

Hey, what would you say the average build cost is on a Dumble style amp? :)

bluesfendermanblues
Posts: 1315
Joined: Tue May 22, 2007 12:57 pm
Location: Dumble City, Europe

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by bluesfendermanblues » Mon Feb 14, 2011 10:13 am

wescaster wrote:Hey, what would you say the average build cost is on a Dumble style amp? :)
Now lets see.....

Material cost: the simple answer is cost of materials, which is around 500-1000 USD, depending on component quality,shipping cost and local customs/taxing costs. Which is not even the price of a quality guitar.

Cost of labour
/opportunity cost - if you put a price on your own time spend on sourcing the parts and building the amp, you must factor in 50-100 hours work at an hourly rate of 8.25 USD/Hour (minimum wage) up to 100 USD/Hour (professional)
Minimum wage, calculation:
if you are working at a fast pace, your price will be 8.25*50 = 412.5 USD and 8.25*100 = 825 USD, working at a slow pace
Professional salary, calculation: If you are working at a fast pace, your price will be 100*50 = 5000 USD and 100*100 = 10,000 USD, if you are working at a slow pace

=> Total cost = material (500-1,000) + Labour (415.5-10,000) = 915.4 - 11,000

Therefore, you should only build a Dumble amp if you are a skillfull builder, earning a relatively low wage all other people should much rather buy a Redplate, Bludo, VVT, Glaswerks or Fuchs.... Its much cheaper in the long run. :wink:
Diva or not? - Respect for Mr. D's work....)

User avatar
Structo
Posts: 15451
Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by Structo » Mon Feb 14, 2011 3:38 pm

To Wescaster,

Mt. Vernon, eh?

I had to look that up on a map.

I knew there was a Mt. Vernon Washington.

So your over by John Day?

Love the country around there. :D
Tom

Don't let that smoke out!

wescaster
Posts: 34
Joined: Sat Feb 14, 2009 11:51 pm
Location: Mt.Vernon Oregon

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by wescaster » Mon Feb 14, 2011 6:05 pm

Mt.Vernon.. Yep. I think just about every state has a Mt.Vernon. This Mt. Vernon is so small the street lights dim when I get an email :wink: And yes, eight miles from John Day.

I'm building my first amp right now (Weber Vibrolux Reverb kit 6a20 HP)

I'm at the completed stage where you look at it and wonder why it is not working.

Anyway, the Dumble style layout and schematics look easier than what I've been through.
Don't get me wrong, I've been enjoying myself and learning as I go.

User avatar
Structo
Posts: 15451
Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by Structo » Tue Feb 15, 2011 1:19 am

Well, you've come to the right place if you run into trouble or just want to chat about amps.

Have fun!
Tom

Don't let that smoke out!

wescaster
Posts: 34
Joined: Sat Feb 14, 2009 11:51 pm
Location: Mt.Vernon Oregon

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by wescaster » Tue Feb 15, 2011 1:44 am

So, where are you in Oregon Tom? Love the picture of the kid sticking the knife in the outlet. You were that kid too huh? :shock:

grtamp
Posts: 335
Joined: Tue Mar 23, 2010 9:37 pm

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by grtamp » Mon Mar 21, 2011 6:29 pm

is the pab relay wiring layout correct with the schematics?!? I notice some difference!

talbany
Posts: 3265
Joined: Tue Mar 28, 2006 5:03 am
Location: Dumbleland

Re: #183 5th Generation ODS Skyliner. Layout/Schematic

Post by talbany » Fri Apr 01, 2011 4:58 pm

If you guy's see a discrepancy please try to help out and point them out...Thank You!

Tony
The laws of physics are the same on your bench as they are on Mr Dumbles

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests