the final tone stack values:
Rslope 100k
Treble 250kB 270pF
Bass 1MA 10nF
Mid 25kA 10nF
It still needs a cab built but I can't stop playing it.
Dynaco Mark III / #124 inspired preamp layout
Moderators: pompeiisneaks, Colossal
Re: Dynaco Mark III / #124 inspired preamp layout
Tony,
Which VVT amp is Mark using?
I always though GFR was a great band.
Recently hear about Marks son becoming paralyzed from a fall, tragic.
Bob, did you keep the 100K/ 221K plates on V1?
Which VVT amp is Mark using?
I always though GFR was a great band.
Recently hear about Marks son becoming paralyzed from a fall, tragic.
Bob, did you keep the 100K/ 221K plates on V1?
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Dynaco Mark III / #124 inspired preamp layout
Tom,
Yes, Rplates remained at 100K/ 221K. Initially I was going to reduce those values, because the gain was over the top, but changing out to lower mu tubes did the trick. Using a tele w/ humbucker, the volume at 11 o clock (chicken head position) the gain begins to overdrive. At 10 o clock it's nice and clean, 2 o clock is almost too much gain, but for now I'll leave it as is. The strat can get basically the same using slightly wider settings. Thanks for asking.
Yes, Rplates remained at 100K/ 221K. Initially I was going to reduce those values, because the gain was over the top, but changing out to lower mu tubes did the trick. Using a tele w/ humbucker, the volume at 11 o clock (chicken head position) the gain begins to overdrive. At 10 o clock it's nice and clean, 2 o clock is almost too much gain, but for now I'll leave it as is. The strat can get basically the same using slightly wider settings. Thanks for asking.
Re: Dynaco Mark III / #124 inspired preamp layout
TomStructo wrote:Tony,
Which VVT amp is Mark using?
I always though GFR was a great band.
Recently hear about Marks son becoming paralyzed from a fall, tragic.
Bob, did you keep the 100K/ 221K plates on V1?
A 4X6V HRM.. Somewhere I have a clip of him using it in the Studio..I'll post it if I can find it..
Bob.. Cool Guitar..
Tony
" The psychics on my bench is the same as Dumble'"
Re: Dynaco Mark III / #124 inspired preamp layout
Sorry I didn't realize that I forgot to post the informationjon wrote:IF you were to change the PI to a Poseidon cascading LTP and add a Sunn 200s preamp you would have a baby WInterland.
You do not have the required permissions to view the files attached to this post.