MS Visio templates for download
Moderators: pompeiisneaks, Colossal
MS Visio templates for download
Schematic, layout, faceplate etc templates. Many files have multiple pages so make sure you check.
Right clip "save target as"
http://www.patmedia.net/bob-ingram/parts.zip
Right clip "save target as"
http://www.patmedia.net/bob-ingram/parts.zip
Re: MS Visio templates for download
Is this for Microsoft Visio?
Tommy
Tommy
Re: MS Visio templates for download
Is this for Microsoft Visio?
Tommy
Tommy
Re: MS Visio templates for download
Yes.
And thank you, Bob! Very much indeed.
Really great!
And thank you, Bob! Very much indeed.
Really great!
Re: MS Visio templates for download
Yes, that's what "MS" is.Tdale wrote:Is this for Microsoft Visio?
Tommy
- skyboltone
- Posts: 2287
- Joined: Wed May 10, 2006 7:02 pm
- Location: Sparks, NV, where nowhere looks like home.
Re: MS Visio templates for download
This is remedial but....how do you get them so that the program accesses them?Bob-I wrote:Schematic, layout, faceplate etc templates. Many files have multiple pages so make sure you check.
Right clip "save target as"
http://www.patmedia.net/bob-ingram/parts.zip
thanks
The Last of the World's Great Human Beings
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Re: MS Visio templates for download
Thanks Bob! that was very generous.
Re: MS Visio templates for download
You hafta buy it. Sorry.skyboltone wrote:This is remedial but....how do you get them so that the program accesses them?Bob-I wrote:Schematic, layout, faceplate etc templates. Many files have multiple pages so make sure you check.
Right clip "save target as"
http://www.patmedia.net/bob-ingram/parts.zip
thanks
- smokin' tone
- Posts: 89
- Joined: Wed Jun 14, 2006 6:07 pm
Re: MS Visio templates for download
I havent done this in a while but I think if you open the drawing in Visio and create a new stencil, you should be able to drag the drawings one at a time into it. You can use the help feature in Visio and it will walk you through it. Search for "new stencil".skyboltone wrote:This is remedial but....how do you get them so that the program accesses them?Bob-I wrote:Schematic, layout, faceplate etc templates. Many files have multiple pages so make sure you check.
Right clip "save target as"
http://www.patmedia.net/bob-ingram/parts.zip
thanks
- boldaslove6789
- Posts: 957
- Joined: Mon Aug 31, 2009 5:52 pm
- Location: Near Dallas, TX
Re: MS Visio templates for download
The link is dead, does anyone have this .zip?
Greg D.C.
Can you dig it?
(NEW VIDS here!!) http://www.youtube.com/user/GDClarkProject
http://quinnamp.com/ http://www.prairiewoodguitars.com/
http://www.funkymunkpedals.com/
Can you dig it?
(NEW VIDS here!!) http://www.youtube.com/user/GDClarkProject
http://quinnamp.com/ http://www.prairiewoodguitars.com/
http://www.funkymunkpedals.com/
Re: MS Visio templates for download
Not sure if this is the same one.. but there is one here ...boldaslove6789 wrote:The link is dead, does anyone have this .zip?
http://amps.zugster.net/tools/visio-parts
Re: MS Visio templates for download
Here's the 124 partial Layout that Bob posted that has most of they key parts you need to do a layout with :
You do not have the required permissions to view the files attached to this post.
Re: MS Visio templates for download
This should get you started. Layout stuff in Visio 2003 format. You'll still need Bob's shapes for schematics.
You do not have the required permissions to view the files attached to this post.
briane wrote:... it really is a journey, and you just can't farm out the battle wounds.
Re: MS Visio templates for download
To add shapes to Visio, you go to "My Documents" and there should be a folder called "My Shapes"
Copy the new shapes to that folder and they should be accessible when you have Visio running.
Copy the new shapes to that folder and they should be accessible when you have Visio running.
Tom
Don't let that smoke out!
Don't let that smoke out!
- boldaslove6789
- Posts: 957
- Joined: Mon Aug 31, 2009 5:52 pm
- Location: Near Dallas, TX
Re: MS Visio templates for download
Thanks guys.
I was looking for more Faceplate shapes (like knobs, pilot lights, switches etc. to design faceplates.
I was looking for more Faceplate shapes (like knobs, pilot lights, switches etc. to design faceplates.
Greg D.C.
Can you dig it?
(NEW VIDS here!!) http://www.youtube.com/user/GDClarkProject
http://quinnamp.com/ http://www.prairiewoodguitars.com/
http://www.funkymunkpedals.com/
Can you dig it?
(NEW VIDS here!!) http://www.youtube.com/user/GDClarkProject
http://quinnamp.com/ http://www.prairiewoodguitars.com/
http://www.funkymunkpedals.com/