Final ODS-101 Schematics
Moderators: pompeiisneaks, Colossal
Re: Final ODS-101 Schematics
remove the line from the bottom of the presence pot to ground - the only ground path for the signal on that pot is through the cap or via the tail resistor.
Former owner of Music Mechanix
www.RedPlateAmps.com
www.RedPlateAmps.com
Re: Final ODS-101 Schematics
Thanks, everyone. I corrected them again.
You may want to change the bias supply according to Brandon's (Funk) recent post on this subject.
Of course, special thanks to Scott and Gil and Brandon.
Best,
Jake
You may want to change the bias supply according to Brandon's (Funk) recent post on this subject.
Of course, special thanks to Scott and Gil and Brandon.
Best,
Jake