Hello People!
It's been a while since I've been here and I am in need of some guidance.
About 1.5 yrs ago I started a Tweeked D'Lite amp. I got the chassis & boards from Moss and the relay brd and other parts from other distributors. No problem there.
However, if memory serves me there were a lot of mods to this design at the time and I only finished maybe 3/5 of the work on the amp.
My schematic says Rev 1.2 but the Board layout I have noted "Version 1.1" and there are differences in the board and schematic layout.
Have there been more recent "mods" to the schematic/board relationship?
Or, should I just use the schematic Rev 1.2 for component values and use the board to check placement or visa versa?
I'm getting ready to go back in and finish this up (got side tracked- long story) but I don't want to build 1/2 of one and 1/2 of another. LOL
Any insights greatly appreciated.
Tweeked D'Lite Version?
Moderators: pompeiisneaks, Colossal
Re: Tweeked D'Lite Version?
Here's a start.
There is plenty of info to be located by the Search function.
http://ampgarage.com/forum/viewtopic.ph ... e+versions
There is plenty of info to be located by the Search function.
http://ampgarage.com/forum/viewtopic.ph ... e+versions
Re: Tweeked D'Lite Version?
Thanks. I downloaded a more recent version. It's not drastically different.Teleguy61 wrote:Here's a start.
There is plenty of info to be located by the Search function.
http://ampgarage.com/forum/viewtopic.ph ... e+versions