ODS Eyelet Boards

Dumble schematics, designs, pictures. Only members may post files here.

Moderators: pompeiisneaks, Colossal

User avatar
martin manning
Posts: 13080
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

ODS Eyelet Boards

Post by martin manning »

In the .pdf's below are all-eyelet versions of the ODS PCB's and preamp eyelet boards TAG member JBorders previously had made up for sale. The eyelet versions have the same overall dimensions and mounting centers, which has become the "TAG standard" to which other members have had chassis fabricated for sale.

The original intent was to replace the PCB/Preamp board set, which did not match any original Dumble ODS, and so there are differences with respect to the (authentic) layout drawings posted on TAG by Tony Albany. The preamp board closely matches Dumble's layout, however, so any important component interactions are preserved. The most notable difference is that all of the power supply filters are located on the main power supply board, so the remotely mounted B+5 filter capacitor seen in the layout drawings is not needed. The FET board layout required extensive rework for eyelet construction in the same dimensions as the PCB, but it has been proven to work well.

These boards can be configured for any ODS variant, including HRM and Bluesmaster using the small daughter board. Note that the OD and PAB relay board connections for all variants are shown for "OD on" when the OD relay coil is energized. Some original amps were configured in the opposite way.
You do not have the required permissions to view the files attached to this post.
Last edited by martin manning on Tue Mar 19, 2024 12:07 pm, edited 27 times in total.
User avatar
xtian
Posts: 6990
Joined: Mon Apr 19, 2010 8:15 pm
Location: NorCal
Contact:

Re: ODS Eyelet Boards

Post by xtian »

Very nice.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
dorrisant
Posts: 2613
Joined: Tue Sep 21, 2010 1:27 pm
Location: Somewhere between a river and a cornfield
Contact:

Re: ODS Eyelet Boards

Post by dorrisant »

Yes... Very nice. Thank you Martin.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Aaron
Posts: 641
Joined: Wed Feb 08, 2006 1:07 pm

Re: ODS Eyelet Boards

Post by Aaron »

Nice work Martin, thank you.
User avatar
M Fowler
Posts: 14017
Joined: Wed Jan 16, 2008 2:19 am
Location: Walcott ND

Re: ODS Eyelet Boards

Post by M Fowler »

Thank you Martin.
User avatar
martin manning
Posts: 13080
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

Re: ODS Eyelet Boards

Post by martin manning »

No trouble at all. A universal relay board has been added.
dcribbs1412
Posts: 1377
Joined: Wed Jun 11, 2008 6:56 pm
Location: Arizona Desert

Re: ODS Eyelet Boards

Post by dcribbs1412 »

Thanks Martin

D
User avatar
stelligan
Posts: 1444
Joined: Sat Sep 30, 2006 3:58 pm
Location: Nashvull

Re: ODS Eyelet Boards

Post by stelligan »

Perfect timing. Thanks :!:
stiltamp
Posts: 84
Joined: Sun Jun 11, 2006 6:11 pm

Re: ODS Eyelet Boards

Post by stiltamp »

Thank you very much for sharing the board layouts.
User avatar
martin manning
Posts: 13080
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

Re: ODS Eyelet Boards

Post by martin manning »

Updated with relay connections for Skyliner OD/PAB, and corrected relay diode orientation. :^)
User avatar
alkuz1961
Posts: 179
Joined: Sat Mar 03, 2012 3:32 am
Contact:

Re: ODS Eyelet Boards

Post by alkuz1961 »

Image

Image

Image

Image

Image

Image

Image
You do not have the required permissions to view the files attached to this post.
Last edited by alkuz1961 on Wed Jan 08, 2020 8:16 am, edited 1 time in total.
dcribbs1412
Posts: 1377
Joined: Wed Jun 11, 2008 6:56 pm
Location: Arizona Desert

Re: ODS Eyelet Boards

Post by dcribbs1412 »

Nicely done!
Thank you!

D
stiltamp
Posts: 84
Joined: Sun Jun 11, 2006 6:11 pm

Re: ODS Eyelet Boards

Post by stiltamp »

Thanks to all for sharing the eylet boards and the PCB-Layouts.
amplifiednation
Posts: 2070
Joined: Sun Dec 26, 2010 6:19 pm
Location: Boston
Contact:

Re: ODS Eyelet Boards

Post by amplifiednation »

Martin. Thank you for sharing this. The drawings are great.
Amplified Nation
www.amplifiednation.com
@ampnation
amplifiednation
Posts: 2070
Joined: Sun Dec 26, 2010 6:19 pm
Location: Boston
Contact:

Re: ODS Eyelet Boards

Post by amplifiednation »

I draw up the eyelet boards in CAD. If anyone wants a set, let me know I'll get some made.
Amplified Nation
www.amplifiednation.com
@ampnation
Post Reply