Robben Ford's Dumble

Dumble schematics, designs, pictures. Only members may post files here.

Moderators: pompeiisneaks, Colossal

roknroll
Posts: 225
Joined: Thu May 18, 2006 2:13 am
Location: New York

you are all welcome

Post by roknroll »

you are all welcome
I do not know anything about the amp in the pictures except that it belongs to RF.
User avatar
ayan
Posts: 1335
Joined: Thu Mar 02, 2006 9:04 pm
Location: Los Angeles, CA

Re: SN

Post by ayan »

llemtt wrote:Nice nice pictures! Thanks roknroll

What's the amp SN?

teo
Teo, very recently someone posted pictures of a Carlton/Ford show. There were a couple of close ups of Ford's amps (he had two of them, while Carlton's had broken down and was playing through the Bludotone). In the close ups you could see one of Robben's amps service tag, with its serial number clearly readable. I didn't save the pictures and don't remember the number, and worse yet, I am not even sure what board those pictures were posted at... probably TGP.

Hopefully this will jog someone's memory and they will steer you in the right direction to find out the information you're looking for.

Gil
llemtt
Posts: 323
Joined: Sat Feb 04, 2006 3:13 pm

Re: Robben Ford's Dumble

Post by llemtt »

Thank you Gil

It was on TGP: SN #148 but that's the other one... the "green" one is older, something like #13?

Teo
johan
Posts: 179
Joined: Sun Mar 18, 2007 11:07 am

Re: Robben Ford's Dumble

Post by johan »

Would that be two 8 ohm speakers wired for 4 or 16 ohm?
Any difference in tone between 4 or 16 ohm?
johan
Posts: 179
Joined: Sun Mar 18, 2007 11:07 am

Re: Robben Ford's Dumble

Post by johan »

double post
hipbluescat
Posts: 69
Joined: Sun Oct 15, 2006 11:41 am

Re: Robben Ford's Dumble

Post by hipbluescat »

What is the dimensions of the speaker cabinet ?

Is the cabinet made of birch ply ?

Would the baffle board also be made of birch ply wood ?

What does the rear port do top the tone ?
Post Reply