ods reverb schematic
Moderators: pompeiisneaks, Colossal
-
groovtubin
- Posts: 1104
- Joined: Tue Feb 07, 2006 4:52 am
ods reverb schematic
scizo
You do not have the required permissions to view the files attached to this post.
Re: ods reverb schematic
Thanks!
It's kinda fuzzy w/ my viewer though. I'll figure it out.
It's kinda fuzzy w/ my viewer though. I'll figure it out.
-
LooseChange
- Posts: 79
- Joined: Tue Jan 31, 2006 9:31 pm
- Contact:
Re: ods reverb schematic
That's great, thanks!
Anyone up for extrapolating a schematic out of this??
Anyone up for extrapolating a schematic out of this??
-
groovtubin
- Posts: 1104
- Joined: Tue Feb 07, 2006 4:52 am
ods reverb
quite welcome guys, but....be a dude...take the time to delve in and draw it out....rewards are great!
jp
jp
Re: ods reverb schematic
Looks like a scan of a scan of a scan.
Very blurry.
Very blurry.
Tom
Don't let that smoke out!
Don't let that smoke out!
-
groovtubin
- Posts: 1104
- Joined: Tue Feb 07, 2006 4:52 am
ods reverb
go to blue guitar, its basically a 70`s preamp w/60`s pot values, and a BASS PI
jp
jp
-
glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: ods reverb schematic
Ah, it surfaces again.
First time I saw that is like 50Megs!
First time I saw that is like 50Megs!
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
-
Todd Hepler
- Posts: 24
- Joined: Mon Jan 17, 2005 10:16 pm
- Location: Euharlee, GA
Re: ods reverb schematic
Anyone have a clear copy of this? I just traded for a 70 Pro reverb that has been hacked full of torres' mods - I would love to implement this circuit!
-Or-
Can anyone make a suggestion for a definitive Dumble Reverb circuit.
Thanks,
-Todd
-Or-
Can anyone make a suggestion for a definitive Dumble Reverb circuit.
Thanks,
-Todd
Re: ods reverb schematic
One drawback of the ckt is that the OD volume is not coupled to the reverb singal volume, so if the OD volume is increased above the Clean volume level, the Reverb signal gets lost and no reverb is heard. If the OD level is set below the Clean signal level, the reverb is too much. 