Transformer for Re-amping device

stompjunkie · Post by **stompjunkie** » Fri Dec 08, 2006 4:55 pm

I've been wanting to try a re-amping device for a while now, and I came across a schematic for one recently. The idea seems interesting, and I should be able to build one relatively cheap. The only thing that has me confused is the transformer.... the tansformer is listed as " a 500 ohm / 30 kilohm audio transformer, such as a UTC 0-10" .... I've done some searching and I've come up with nothing. I've never seen a transformer listed with just impedance before (although I can see why that would be the most important factor in a piece like this...) Can anyone tell me what to look for, or where I can get a nice trannie for this? FWIW.. I'm allready on 10 piece pricing with MM..... Many thanks for all of your help!

skyboltone · Post by **skyboltone** » Fri Dec 08, 2006 5:56 pm

That's an interstage transformer with a 60/1 ratio. Give these guys a call and see if they can help you:

http://www.fairradio.com/

Good luck
Dan

oldhousescott · Post by **oldhousescott** » Fri Dec 08, 2006 6:37 pm

You might try the Edcor line of matching transformers. Looks like this one might work.

LeeMo · Post by **LeeMo** » Sat Dec 09, 2006 1:11 am

http://www.jensen-transformers.com/apps_sc.html#musical

You might want to look here. They make trannys for a bunch of studio gear.

LeeMo

EDIT: more specifcally
http://www.jensen-transformers.com/as/as092.pdf

stompjunkie · Post by **stompjunkie** » Sun Dec 10, 2006 4:51 pm

my many many thanks....I'll let you guys know what I go with, and how it all truns out!!!

The Amp Garage

Transformer for Re-amping device

Transformer for Re-amping device

Re: Transformer for Re-amping device

Re: Transformer for Re-amping device

Re: Transformer for Re-amping device

Re: Transformer for Re-amping device