6v6 for 50-something Alamo

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

User avatar
Lonely Raven
Posts: 878
Joined: Fri Nov 16, 2007 4:09 am
Location: Bolingbrook, IL
Contact:

Re: 6v6 for 50-something Alamo

Post by Lonely Raven »

Zippy wrote:
Lonely Raven wrote:Unfortunately I did not make a layout yet. I had some health issues, and moved into a new house! So it's been sitting in storage since then.
Hope you're felling better and getting settled into the new home. I've been going through much the same the last few years - both health issues and moving.

Might you be able to start with some pretty gut shots?


I'll see what I can do!
Jack of all Trades,
Master of None
User avatar
Scooter Thomas
Posts: 32
Joined: Sat Aug 10, 2013 9:40 pm
Location: Austin, TX

Re: 6v6 for 50-something Alamo

Post by Scooter Thomas »

Hmm, I have two Alamos, Capri and Challenger. I'm looking at the Capri schem and I think I have the Challenger schem somewhere. Point is I thought many Alamo schems were available though the early models like the 3 would be hardest to find.

Lest anyone forget, this VG article may be the only source for 'Mo history:
http://www.vintageguitar.com/1816/alamo ... the-alamo/
Zippy
Posts: 2052
Joined: Tue Apr 25, 2006 11:18 pm

Re: 6v6 for 50-something Alamo

Post by Zippy »

Schematics for Capri, Fiesta, Jet, and Montclair here:

http://www.webphix.com/schematic%20heav ... inbin.html

Note: I didn't say they were great.
User avatar
Lonely Raven
Posts: 878
Joined: Fri Nov 16, 2007 4:09 am
Location: Bolingbrook, IL
Contact:

Re: 6v6 for 50-something Alamo

Post by Lonely Raven »

Scooter Thomas wrote:Hmm, I have two Alamos, Capri and Challenger. I'm looking at the Capri schem and I think I have the Challenger schem somewhere. Point is I thought many Alamo schems were available though the early models like the 3 would be hardest to find.

Lest anyone forget, this VG article may be the only source for 'Mo history:
http://www.vintageguitar.com/1816/alamo ... the-alamo/
Great info!

~Eric~
Jack of all Trades,
Master of None
Post Reply