I just drew a layout (attached) for my YBA-1A 1970 model head because I couldn't find one anywhere on the 'net and hoped you guys would post it and share it with other archive sites. I found several different versions of the schematic, only one of which matched mine so I know there are variations but this will get someone going if they need it.
(typo in model corrected)
Traynor YBA-1A 1970 Layout
Moderators: pompeiisneaks, Colossal
- gui_tarzan
- Posts: 606
- Joined: Thu Jan 16, 2014 3:10 am
- Location: The 26th State
Traynor YBA-1A 1970 Layout
You do not have the required permissions to view the files attached to this post.
Last edited by gui_tarzan on Mon Jan 27, 2014 12:30 am, edited 4 times in total.
Re: Traynor YBA-1A 1970 Layout
Cool! Thx and welcome!
I build and repair tube amps. http://amps.monkeymatic.com
Re: Traynor YBA-1A 1970 Layout
Wait is the YB1A a model? or a typo for the YBA-1a Bassmaster Mk II?
Hard to keep up with all the old Traynor models.
Hard to keep up with all the old Traynor models.
- gui_tarzan
- Posts: 606
- Joined: Thu Jan 16, 2014 3:10 am
- Location: The 26th State
Re: Traynor YBA-1A 1970 Layout
Sorry, typos are now corrected.
- Kagliostro
- Posts: 535
- Joined: Wed Dec 30, 2009 12:09 am
- Location: Italy
Re: Traynor YBA-1A 1970 Layout
Many Thanks for sharing
Please can you post the PT voltages (AC & DC if you can) and Bias voltage ?
and .... have you a link to the exact schematic that fit your model ?
Thanks Again
K
EDIT: Searching the schematic I've find this one, is it like your's ?
Please can you post the PT voltages (AC & DC if you can) and Bias voltage ?
and .... have you a link to the exact schematic that fit your model ?
Thanks Again
K
EDIT: Searching the schematic I've find this one, is it like your's ?
You do not have the required permissions to view the files attached to this post.