Hi Tom
Been wondering about the Kelley non reverb models.
Can you remember if there were any major differences in the preamp compared to the reverb models?
Did it have two or three preamp valves? Wondered if it still had four stages before the cathodyne inverter or only three.
Be interesting to see if there are any schematics for them floating about out there.
Cheers
Shane
Jim kelly single channel layout ?
Moderators: pompeiisneaks, Colossal
Re: Jim kelly single channel layout ?
The NR model is more or less a Ampeg with 6V6 instead of 7868 tubes,shane wrote:Hi Tom
Been wondering about the Kelley non reverb models.
Can you remember if there were any major differences in the preamp compared to the reverb models?
Did it have two or three preamp valves? Wondered if it still had four stages before the cathodyne inverter or only three.
Be interesting to see if there are any schematics for them floating about out there.
Cheers
Shane
And some small tweaks.
http://el34world.com/charts/Schematics/ ... 127868.gif
Personally I find the reverb models more interesting
Re: Jim kelly single channel layout ?
Thanks oj,
looking at the ampeg schematic I can see where the design came from!
I think the reverb model would be more interesting too😀
Cheers
Shane.
looking at the ampeg schematic I can see where the design came from!
I think the reverb model would be more interesting too😀
Cheers
Shane.
-
- Posts: 1391
- Joined: Tue Dec 18, 2012 5:53 pm
- Location: Texas
Re: Jim kelly single channel layout ?
3 stages then the PI. I gave a verbal description of it on pg 2, based on visually tracing the non-reverb pics.shane wrote:Hi Tom
Been wondering about the Kelley non reverb models.
Can you remember if there were any major differences in the preamp compared to the reverb models?
Did it have two or three preamp valves? Wondered if it still had four stages before the cathodyne inverter or only three.
Be interesting to see if there are any schematics for them floating about out there.
Cheers
Shane
I totally noticed the Ampeg schematic a while back and had an aha moment. I played the SB-12 at a jam and it ruled, so I came home, looked it up, and aha...
-
- Posts: 478
- Joined: Thu Nov 01, 2007 4:42 am
- Location: Southern California
Re: Jim kelly single channel layout ?
Hello Gents. I would like to build a 2-6V6 non-reverb version of this amp. Anyone have a Schematic that would help? I have the original Kelley one and the Ampeg. Anyone draw one they would like to share?
Learning to learn...
- dorrisant
- Posts: 2635
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
1 others liked this
Re: Jim kelly single channel layout ?
You could try the one I posted on the first page... It must be relatively free of errors but let me know if you see anything out of whack.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: Jim kelly single channel layout ?
Gentlemen, can anyone pm me a new layout? really want to build this project. ps I am not ceriatone
- dorrisant
- Posts: 2635
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: Jim kelly single channel layout ?
"Education is what you're left with after you have forgotten what you have learned" - Enzo