GEC Data sheets
Moderators: pompeiisneaks, Colossal
-
TZRsteve
GEC Data sheets
all gone now
Last edited by TZRsteve on Wed Jul 12, 2023 2:32 pm, edited 1 time in total.
-
sluckey
- Posts: 3106
- Joined: Sun Jul 22, 2007 7:48 pm
- Location: Mobile, AL
- Contact:
2 others liked this
Re: GEC Data sheets
Why do you think having tube data sheets in the forum is a good idea? They will quickly be forgotten. Google pulls up the data sheets as fast as I can type "KT77 data sheet".
-
Stevem
- Posts: 4604
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
1 others liked this
Re: GEC Data sheets
I agree with the above!
Every day people post up questions to which the answers are to be found right in the first couple of listing at the top of this technical section, so why bother with this effort?
Might be best to post up a example of how to use such data!
Every day people post up questions to which the answers are to be found right in the first couple of listing at the top of this technical section, so why bother with this effort?
Might be best to post up a example of how to use such data!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
-
TZRsteve
1 others liked this
Re: GEC Data sheets
OK mate i will remove for you
these data sheets had a whole load of circuit examples in them
with plenty of tested ideas
the KT data sheets have plans for willimson amps and standard tube amps upto 400 watts but as you say
there is no point in wasting my time with the effort of posting them here
so all gone now
these data sheets had a whole load of circuit examples in them
with plenty of tested ideas
the KT data sheets have plans for willimson amps and standard tube amps upto 400 watts but as you say
there is no point in wasting my time with the effort of posting them here
so all gone now
-
martin manning
- Posts: 13342
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: GEC Data sheets
Maybe the GEC data sheets could go in the Reading Material on Steroids! sticky-post as reference material.
-
Stevem
- Posts: 4604
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: GEC Data sheets
That to me would be a good place to have them referenced to!
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
-
pompeiisneaks
- Site Admin
- Posts: 4222
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
Re: GEC Data sheets
Well it seems TZRsteve has asked that I deactivate his account. I'm doing so. Not sure why exactly. He pm'ed me if he could post these, I told him I didn't see any need to as they'd likely already exist in a ton of other places like duncan's tube datasheets archive etc. It seems he's upset many here agreed with me. I did tell him I'm not going to tell him to not post them, I just didn't think they'd be any interest here specifically...
Oh well.
~Phil
Oh well.
~Phil
tUber Nerd!
-
wpaulvogel
- Posts: 433
- Joined: Wed Jan 23, 2019 3:11 am
- Location: Leesburg Georgia
- Contact:
Re: GEC Data sheets
Phil, I think he WOKE up on the wrong side of the bed.