6P14P-EV's

fretless · Post by **fretless** » Thu Sep 22, 2011 3:10 pm

gear'n up for the rocket type retube , what are your thoughts on

http://www.ebay.com/itm/260849322616?ss ... 1423.l2649

Thanks

jon · Post by **jon** » Thu Sep 22, 2011 3:41 pm

They are good tubes but the price is just OK

fretless · Post by **fretless** » Thu Sep 22, 2011 3:54 pm

jon wrote:They are good tubes but the price is just OK

Thank you John , can you recommend a better source ?

sliberty · Post by **sliberty** » Thu Sep 22, 2011 4:34 pm

I use those tubes all the time, but $7 per tube is a more typical deal. Keep looking on eBay and you will find them cheaper.

Bob S · Post by **Bob S** » Thu Sep 22, 2011 5:00 pm

They are very good tubes IMO. I use them too.
Get them for a good price before they are all snapped up.

fretless · Post by **fretless** » Thu Sep 22, 2011 6:30 pm

Thanks Fellas !

tubeswell · Post by **tubeswell** » Thu Sep 22, 2011 6:42 pm

Yep, those are what're typically rebranded as EL84Ms. 8 tubes for $65 is just over $8 per tube. What're ya'll complaining about?

fretless · Post by **fretless** » Thu Sep 22, 2011 7:16 pm

found some "K" s too , what would you rather have ?

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... ink:top:en

fretless · Post by **fretless** » Thu Sep 22, 2011 7:48 pm

ok , scored some ER's for about 10 apiece

Structo · Post by **Structo** » Thu Sep 22, 2011 9:41 pm

Are those the Russian EL84 tubes that everybody is liking a lot?

Was it Tube Tramp (Terry) that was selling those as well?

Are there any data sheets on those?

Bob S · Post by **Bob S** » Fri Sep 23, 2011 2:26 am

Tom - I did see a data sheet on the net - can't find it now.
I do remember the numbers looked like a 7189 on steroids...
Claimed to be capable of handling higher plate voltages.
They do sound very, very good though.

tubeswell · Post by **tubeswell** » Fri Sep 23, 2011 6:33 am

fretless wrote:found some "K" s too , what would you rather have ?

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... ink:top:en

The Russian tube numbering system is about 1/2 way down this page

http://www.tubedata.org/tubnum.html

AFAICT, K is 'vibration resistant', whereas EB is 'long life' 'high reliability' (military) designed for use in missiles and fighter jets

fretless · Post by **fretless** » Sat Sep 24, 2011 3:07 pm

Thank you Sir !

Markusv · Post by **Markusv** » Sat Sep 24, 2011 4:30 pm

I have a set of these in my Liverpool and IMHO they're the best I've used thus far.
A bit ballsier on headroom and the breakup is very smooth without the fizziness I had in the JJ's I used previously. I also have a set of EI's as backup but these are better

I got 3 sets of these when they were still going around $4 each

M

Markusv · Post by **Markusv** » Sat Sep 24, 2011 4:38 pm

Sorry double post

The Amp Garage

6P14P-EV's

6P14P-EV's

Re: 6P14P-EV's

Re: 6P14P-EV's

Re: 6P14P-EV's

Tubes

Re: 6P14P-EV's

Re: 6P14P-EV's

Re: 6P14P-EV's

Re: 6P14P-EV's

Re: 6P14P-EV's

6p14p ev

Re: 6P14P-EV's

Re: 6P14P-EV's

Re: 6P14P-EV's

Re: 6P14P-EV's