Awesome.... give us an update when done.... I have built a lot of pedals using Aion Boards especially their Zen Drive, OCD and Klon board variants... he has great boards...
And here is the aion.com Flare (Fuzz Factory clone). This was a much simpler build (fewer components) but required I ask my buddy for some old Germanium transistors. Again, fired up perfectly first time, so, praise for the instructions and nicely designed PCBs.
I've found lots of good tones with this pedal, both out-of-control noisy shit, and down-to-earth distortion and fuzz. Excellent!
aion-flare.jpg
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
Anyone have vero board layout and schematic for this D*A*M Logan Bender custom one-off MKI Tone Bender?
My friend received a kit years ago from Germany I think and he had trouble building it and lost most of the instructions.
He gave me the DAM layout but his board is different just like the one in the photo I am providing. I don't know how he knew how to build the vero board but no idea how to connect the transistors and other wires. I traced out the board and noted component values.
Mark
s-l1600 (2).jpg
You do not have the required permissions to view the files attached to this post.
Hi Mark: I'll check when i get home. I think i have something. The hardest part is finding those 3 perfect germanium transistors, the ones in the picture look to to be
2 OC71's and or OC75's black Glass but i cant remember what the metal one is.
Man for 5 caps and 8 resistors, these things are hard to get right.
After my quest to build a Mk1 i gave up, could never get them to sound right. I do have a MKII that i built and it is very snarly
I use a good old home made fuzz face, that sounds awesome.
will let you know, Joe.
Last edited by joeboo88 on Thu Feb 15, 2018 3:36 am, edited 1 time in total.
I think I can attach it. I had to turn on my old PC that has a lot of pedal layouts etc....
this looks like what you have, its a vero not a schematic. If you want it some other PM me your email address.... hope this helps
Joe
You do not have the required permissions to view the files attached to this post.