Vox AC30 CC2 PPIMV. What are these R´s for?
Moderators: pompeiisneaks, Colossal
Vox AC30 CC2 PPIMV. What are these R´s for?
Hi.
I´m trying a PPIMV, and I see in the Vox AC30 CC2 schem, that has a PPIMV also, that it has 10K R´s inline between the PI caps and the power valves grid resistors, before the master volume pot. What do these do? What are they for? To avoid having zero resistance between the two lines? To solve a pot feel issue? I´m clueless.
Cheers.
I´m trying a PPIMV, and I see in the Vox AC30 CC2 schem, that has a PPIMV also, that it has 10K R´s inline between the PI caps and the power valves grid resistors, before the master volume pot. What do these do? What are they for? To avoid having zero resistance between the two lines? To solve a pot feel issue? I´m clueless.
Cheers.
-
- Posts: 4576
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Vox AC30 CC2 PPIMV. What are these R´s for?
They are called grid stoppers and they are used to stop oscillations from taking place in the output stage.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: Vox AC30 CC2 PPIMV. What are these R´s for?
Stevem, the amp also has the typical 1K5 grid stoppers of the AC30, these are in addition to the 1K5 R´s. Do they also work as grid stoppers, so each power tube gets 11K5 of resistance?
EDIT: What calls my attention is that they are before the master vol pot. Why not put them after if they are grid stoppers?
EDIT: What calls my attention is that they are before the master vol pot. Why not put them after if they are grid stoppers?
Re: Vox AC30 CC2 PPIMV. What are these R´s for?
Do you have a schematic I can look at..Mostro wrote:Stevem, the amp also has the typical 1K5 grid stoppers of the AC30, these are in addition to the 1K5 R´s. Do they also work as grid stoppers, so each power tube gets 11K5 of resistance?
EDIT: What calls my attention is that they are before the master vol pot. Why not put them after if they are grid stoppers?
Tony
" The psychics on my bench is the same as Dumble'"
Re: Vox AC30 CC2 PPIMV. What are these R´s for?
They make the cut control and MV work better together
Re: Vox AC30 CC2 PPIMV. What are these R´s for?
Mauiboy, could you explain a bit more? How do they work? Do they isolate the master from the cut so they don´t interact?
Re: Vox AC30 CC2 PPIMV. What are these R´s for?
Voltage divider sending less signal to the output? I dont have a schemo...
Re: Vox AC30 CC2 PPIMV. What are these R´s for?
Hey mostro I was in a hurry earlier. Yes, the 10k's isolate the two controls so the loading of the MV doesn't mess with the cut response. Without them the cut control is pretty much useless as the master is turned down.
Re: Vox AC30 CC2 PPIMV. What are these R´s for?
Thanks Mauiboy for the explanation. Makes sense now.