help needed about resistors
Moderators: pompeiisneaks, Colossal
help needed about resistors
Does anybody know where I can get these resistors and what brand/Wattage they are?
You do not have the required permissions to view the files attached to this post.
Re: help needed about resistors
Cuties. Like pillbugs. Want.
I build and repair tube amps. http://amps.monkeymatic.com
Re: help needed about resistors
Cuties. Like pillbugs. Want.
I build and repair tube amps. http://amps.monkeymatic.com
Possibly Vishay CF60
I think those are Vishay CF60 1/2watts. If they are they are available at Mouser
Re: help needed about resistors
http://www.vishay.com/docs/31068/ccf60.pdf
So they're metal film, not carbon film. But they're 1W 1% for 10 cents each. Nice. And they look like pill bugs, which is a huge plus.
So let's have the metal film vs. carbon film debate again! Haven't heard that for a few months. Never mind. Here's a thread from 2011. http://ampgarage.com/forum/viewtopic.php?t=13984
So they're metal film, not carbon film. But they're 1W 1% for 10 cents each. Nice. And they look like pill bugs, which is a huge plus.
So let's have the metal film vs. carbon film debate again! Haven't heard that for a few months. Never mind. Here's a thread from 2011. http://ampgarage.com/forum/viewtopic.php?t=13984
I build and repair tube amps. http://amps.monkeymatic.com
Re: help needed about resistors
I have used them where MF are indicated in a number of D clones and cant tell the difference between the CCF60 and the currently available RN65.
NOS RN65 may be a different story.
Your mileage may vary
They are my go to resistor for repairs and in builds where the CF/MF is not at issue.
Regards
Randy
NOS RN65 may be a different story.
Your mileage may vary
They are my go to resistor for repairs and in builds where the CF/MF is not at issue.
Regards
Randy
Re: help needed about resistors
Those are nice resistors for the price. I think Soldano uses them. Remind me of Tic Tacs
Re: help needed about resistors
Thanks a lot guys. They look a lot better than RN65. Had some serious faillure with RN65. Did you notice failures to.
Re: help needed about resistors
John Suhr uses these little pups to in his Jim Kelley clone if I can say so.
- gui_tarzan
- Posts: 606
- Joined: Thu Jan 16, 2014 3:10 am
- Location: The 26th State
Re: help needed about resistors
I think you just did.
--Jim
"He's like a new set of strings, he just needs to be stretched a bit."
"He's like a new set of strings, he just needs to be stretched a bit."
Re: help needed about resistors
Hey, my pillbugs arrived from Newark! There are CCF60 series 1W 100K. A 1W Xicon shown for comparison.
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
Re: help needed about resistors
darn, those are cute - gotta get some! Thanks for the idea.