Hi,
I'd like to add an effect loop to my se tube amp to be able to add a reverb pedal (I'd would prefer a reverb tank but it seems much more complicated).
I want to use the existing PT (400Vdc or 6.3Vac).
I found this schematic.
Is-it going to be working?
Any other suggestions?
Thanks
Adding an effect loop
Moderators: pompeiisneaks, Colossal
Adding an effect loop
You do not have the required permissions to view the files attached to this post.
Re: Adding an effect loop
Do you have the value of the Zener diodes ??
Re: Adding an effect loop
It looks like it will work fine, but the "original" Dumbler is quite the same, and has a very mellow sound. I run mine from a 210 volt source driving a 12AX7.
I have changed a few of the values to get the sound I like, but it's a great starting place.
Not knocking the device you show, I just prefer all tubes.
a'doc
I have changed a few of the values to get the sound I like, but it's a great starting place.
Not knocking the device you show, I just prefer all tubes.
a'doc
You do not have the required permissions to view the files attached to this post.
Re: Adding an effect loop
(deleted)