Adding MV to one channel of amp

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
studiodunn
Posts: 285
Joined: Wed Nov 24, 2010 8:50 pm

Adding MV to one channel of amp

Post by studiodunn »

The amp in question is a two channel 100 watter as seen here - http://ampgarage.com/forum/viewtopic.ph ... =crossline


I've installed both a Lar Mar and a crossline in the amp and have stuck with the crossline because it sounded fine.

The Marshall side doesn't need a MV, as it has it's own. The Express side though, as expected, is LOUD and needs tamed, but both styles of PI MVs really have no control until they were turned down to 1 or 2.

What is the simplest Pre PI MV I can add to just the Express channel?

One other thing I want to play with is, The express side has a Footswitchable tone stack lift. It is great but needs attenuated. Is there a way to knock off some volume when lifting the tone stack?

Thanks.
You do not have the required permissions to view the files attached to this post.
Post Reply