[Question] favourite axial eletrolytic cap
Moderators: pompeiisneaks, Colossal
-
- Posts: 1673
- Joined: Thu Oct 06, 2016 5:53 am
[Question] favourite axial eletrolytic cap
As the title says I am wondering what is everyone's favourite 220uf/350V axial eletrolytic cap for a dumble inspired built
I've seen Ruby and Evatco. Struggling to find Sprague Atom
Thanks
I've seen Ruby and Evatco. Struggling to find Sprague Atom
Thanks
Last edited by Bombacaototal on Mon Apr 24, 2017 12:20 pm, edited 1 time in total.
- martin manning
- Posts: 13196
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: [Question] favourite 220uf/350V axial eletrolytic cap
I believe most are using F&T.
-
- Posts: 1673
- Joined: Thu Oct 06, 2016 5:53 am
Re: [Question] favourite 220uf/350V axial eletrolytic cap
Thanks a lot for the replies
In absence of 220uF/300V is 220uF/500V a good substitute
In absence of 220uF/300V is 220uF/500V a good substitute
Re: [Question] favourite 220uf/350V axial eletrolytic cap
Sure...if you can find it. Can you? Axial, I mean. Plenty of radial, snap-in choices for about $7.
I build and repair tube amps. http://amps.monkeymatic.com
-
- Posts: 1673
- Joined: Thu Oct 06, 2016 5:53 am
Re: [Question] favourite 220uf/350V axial eletrolytic cap
Indeed Axial: http://www.hificollective.co.uk/catalog ... citor.htmlxtian wrote:Sure...if you can find it. Can you? Axial, I mean. Plenty of radial, snap-in choices for about $7.
Re: [Question] favourite 220uf/350V axial eletrolytic cap
TAD audio cap(s) made in germany, 220uf, 350v
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
-
- Posts: 1673
- Joined: Thu Oct 06, 2016 5:53 am
Re: [Question] favourite 220uf/350V axial eletrolytic cap
I am looking for a multi section cap can for 2 to 4 times 20uF @ 450V or higher
Does anyone have experience with CE Manufacturing? They look like a good candidate and claim to be a faithful replica of Mallory
F&T have a 20uf/20uF but are out of stock in UK
Does anyone have experience with CE Manufacturing? They look like a good candidate and claim to be a faithful replica of Mallory
F&T have a 20uf/20uF but are out of stock in UK
- pompeiisneaks
- Site Admin
- Posts: 4222
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
Re: [Question] favourite axial eletrolytic cap
I don't have experience with CE but I do recall someone's article/blog on an ampeg repair/recap and they used theirs and seemed to think they were great, but take that with a grain of salt, being second hand and my crusty memory
~Phil
~Phil
tUber Nerd!
-
- Posts: 1673
- Joined: Thu Oct 06, 2016 5:53 am
Re: [Question] favourite axial eletrolytic cap
Cool, I will give it a trypompeiisneaks wrote: ↑Mon Apr 24, 2017 4:46 pm I don't have experience with CE but I do recall someone's article/blog on an ampeg repair/recap and they used theirs and seemed to think they were great, but take that with a grain of salt, being second hand and my crusty memory
~Phil
-
- Posts: 213
- Joined: Sun Feb 02, 2014 6:13 pm
Re: [Question] favourite axial eletrolytic cap
I used a weber multi cap can in a build with good results. mine was 50/40/20/20 I believe. They make quad 20s. +1 on the F+T 220's, fatter but shorter than sprague's but will fit under a fender doghouse.
-
- Posts: 1673
- Joined: Thu Oct 06, 2016 5:53 am
Re: [Question] favourite axial eletrolytic cap
Thanks! I went for the F&T 220davebolden44 wrote: ↑Mon Apr 24, 2017 9:09 pm I used a weber multi cap can in a build with good results. mine was 50/40/20/20 I believe. They make quad 20s. +1 on the F+T 220's, fatter but shorter than sprague's but will fit under a fender doghouse.
I am curious about the results I will have with the CR for the 4x20uF
-
- Posts: 213
- Joined: Sun Feb 02, 2014 6:13 pm
Re: [Question] favourite axial eletrolytic cap
I am sure they are fine quality.
Re: [Question] favourite 220uf/350V axial eletrolytic cap
Look at the JJ can cap. AES sells them.Bombacaototal wrote: ↑Mon Apr 24, 2017 12:20 pm I am looking for a multi section cap can for 2 to 4 times 20uF @ 450V or higher.