I had the task of building a replacement footswitch for one of these monsters... Looking at the schematic... Seems like when the "both" switch is engaged that both LEDs will light but the channels will not combine as both... Does anyone see where I could be wrong? After staring at it for a while, I think the combination of channels could be done with another set of contacts on the "both" switch maybe?!? I don't know... my head hurts.
Notice: The footswitch socket is upside down compared to the plug... so the numbers for the socket would be as the schem is oriented:
6 - 5
4 - 3
2 - 1
Any ideas?
Randall 100ES Footswitch
Moderators: pompeiisneaks, Colossal
- dorrisant
- Posts: 2628
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Randall 100ES Footswitch
You do not have the required permissions to view the files attached to this post.
"Education is what you're left with after you have forgotten what you have learned" - Enzo