Output Transformer primary impedence

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
Mikante
Posts: 200
Joined: Fri Oct 29, 2021 7:07 pm
Location: Italy

Output Transformer primary impedence

Post by Mikante »

Hello,
I found a very good output transformer for my champ cause i d like to upgrade it.
The only problem is the primary impedance which is 5k when all the OT i have seen for this amp are 8k.
Would you use it anyway?
User avatar
roberto
Posts: 1841
Joined: Tue Nov 27, 2007 4:45 pm
Location: Italy

Re: Output Transformer primary impedence

Post by roberto »

It would most probably give too much 2nd harmonic.

You could try it and play with the PSU to lower the voltage, increase the current through the tube and find a sweet spot for that tube.
Another option could be to install an EL34 to fully use the 5k instead of the 8k, if the PT can give enough current.
Mikante
Posts: 200
Joined: Fri Oct 29, 2021 7:07 pm
Location: Italy

Re: Output Transformer primary impedence

Post by Mikante »

I wanted to try the el34, this could be the best of both worlds :lol:
How do i know if the pt has enough juice?
User avatar
martin manning
Posts: 13211
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

Re: Output Transformer primary impedence

Post by martin manning »

Mikante wrote: Fri Jan 13, 2023 1:54 pm I wanted to try the el34, this could be the best of both worlds :lol:
How do i know if the pt has enough juice?
Basically everything will have to double. You will want twice the idle current, and it will produce twice the output power. That means your output transformer will have to be upgraded as well.
Post Reply