Power tube plates and screens, HV CT tied to ground lug on rectifier tube sockets
Power tube cathodes grounded to ground lug near power tubes
Heater CT attached to top of cathode resistors
Everything else connected to main ground buss, terminated to point next to input jack
120hz hum in new build
Moderators: pompeiisneaks, Colossal
-
- Posts: 1069
- Joined: Tue Jul 02, 2013 12:51 am
- Location: East Texas (Yee Yee!)
1 others liked this
Re: 120hz hum in new build
"It's like what Lenin said... you look for the person who will benefit, and, uh, uh..."
-
- Posts: 24
- Joined: Fri Feb 17, 2017 11:23 pm
Re: 120hz hum in new build
You have exorcised the demons! Full out cathode bias with no NFB and a somewhat gainy preamp tends to be the worst case scenario for fighting hum, nicely done!