Hi,
I want to use this toggle for turning a D'lite 22's clean/od mode. My question is, Is current rating of 2A, 5A ; power rating of 400mv safe for this function?
https://www.mouser.ca/ProductDetail/Dai ... 4LVg%3D%3D
Thank you.
D'lite rocker switch safe rating question
Moderators: pompeiisneaks, Colossal
-
mehfuzhoss
- Posts: 68
- Joined: Fri Jul 27, 2018 10:43 pm
-
Stevem
- Posts: 4576
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: D'lite rocker switch safe rating question
If this function your talking about only deals with the preamp tube section and NOT the output tube section, then yes that rating of voltage and current of that switch your considering is good.
Also your reading the details of that switch wrong, it’s rated at 400 MVA, not 400 MV.
These two specifications are very different!
To be honest with you, and to be not at all mean, I sense that you do not know a lot about what your trying to do with this amp.
Do you have a schematic you can post up of this amp and where this switch is destined to go?
Also your reading the details of that switch wrong, it’s rated at 400 MVA, not 400 MV.
These two specifications are very different!
To be honest with you, and to be not at all mean, I sense that you do not know a lot about what your trying to do with this amp.
Do you have a schematic you can post up of this amp and where this switch is destined to go?
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!