Ground question from a non tech
Moderators: pompeiisneaks, Colossal
-
fred_farkel
- Posts: 33
- Joined: Fri Feb 03, 2006 2:37 am
- Location: La Mirada, California
Ground question from a non tech
looking at a revison A and a fender schematic I see the input jack is grounded via a 1.0 resistor. Does this help in reducing noise or something?
Re: Ground question from a non tech
Do you mean the 1 M resistor to ground? This is used to reference the input grid to ground and is part of the biasing of the input triode.
-
fred_farkel
- Posts: 33
- Joined: Fri Feb 03, 2006 2:37 am
- Location: La Mirada, California
resistor
Yep....that be the one!!! Thanks for the help.