Hi
I have a quick question.
Im just learning about a VVR. Does anyone have a layout on one of these things. I have an 18Watt lite that i would like to tryout in it. I have tried a PPIMV but really dont like it & this amp only sounds great is at around 8-9.
I would like the help.
Thanks
Mike
VVR
Moderators: pompeiisneaks, Colossal
-
- Posts: 8
- Joined: Sun Dec 07, 2008 1:20 am
VVR Source
Go to Hall Amplification for starters.
VVR3 is a single Mosfet voltage regulator.
Simple cathode biased amps can get by with one Mosfet reg.
It gets more complicated if you have a fixed bias amp.
http://hallamplification.com/main.html?src=%2F#2,2
The VVR and PPMV are both good to have. You can back down the grid drive with the PPMV to cool off the "fizzies" at low power.
Enjoy!
VVR3 is a single Mosfet voltage regulator.
Simple cathode biased amps can get by with one Mosfet reg.
It gets more complicated if you have a fixed bias amp.
http://hallamplification.com/main.html?src=%2F#2,2
The VVR and PPMV are both good to have. You can back down the grid drive with the PPMV to cool off the "fizzies" at low power.
Enjoy!