Mackie HR824

Non-tube amp discussion to discuss music, girls, life, etc.

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
xtian
Posts: 7029
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Mackie HR824

Post by xtian »

And now for something completely different.

One of my Mackie HR824 (older, not mk2) monitors bit the dust. Makes a constant loud white noise from tweeter only, regardless of whether signal is input, regardless of volume trim settings, and regardless of power switch on front and power switch on rear. Power LED on front panel does not come on.

There is a nice service manual, here: http://bmamps.com/Schematics/Mackie/...ice_Manual.pdf

Troubleshooting advice?
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
NickC
Posts: 1814
Joined: Fri May 14, 2010 1:05 pm
Location: Upstate New York

Re: Mackie HR824

Post by NickC »

Maybe a crossover cap has gone bad?
User avatar
Dr-Joned
Posts: 224
Joined: Thu Dec 13, 2007 9:43 pm
Location: The Great South, USA

Re: Mackie HR824

Post by Dr-Joned »

Link is not working.

EDIT I found it @ http://bmamps.com/Schematics/Mackie/Mac ... Manual.pdf
I Think I Think Too Much !
Post Reply