connectors needed

Non-tube amp discussion to discuss music, girls, life, etc.

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
xtian
Posts: 6990
Joined: Mon Apr 19, 2010 8:15 pm
Location: NorCal
Contact:

connectors needed

Post by xtian »

Mice ate my client's Bose PS1! I need to find the white plastic connectors like the one shown circled. By what name do I search for these?
connector.jpg
I also need to wash wash wash my freaking hands. Ugh.
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
Phil_S
Posts: 5936
Joined: Tue Oct 23, 2007 10:12 pm
Location: Baltimore, MD

Re: connectors needed

Post by Phil_S »

I think you may find what you want from Molex. Something like this? http://www.molex.com/molex/products/fam ... connectors It would be easier if you could show it unplugged.

Ick. Are you charging the "special" rate for this, LOL?
User avatar
xtian
Posts: 6990
Joined: Mon Apr 19, 2010 8:15 pm
Location: NorCal
Contact:

Re: connectors needed

Post by xtian »

I spent over an hour browsing molex.com and mouser.com, and can't find what I need. Here is a better photo. It's either 2.5 or 2.54mm pitch.

And yes, special Hantavirus rate, thankyouverymuch.

connector2.jpg

Actually, I can reuse the connector, I really just need the pins. And in order to do that, I'll need a precise model number. But all the illustrations I've seen look different that this one. Though this one I have, I've certainly seen often enough in consumer electronics, so I'm sure it's common as dirt.
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
xtian
Posts: 6990
Joined: Mon Apr 19, 2010 8:15 pm
Location: NorCal
Contact:

Re: connectors needed

Post by xtian »

I build and repair tube amps. http://amps.monkeymatic.com
Post Reply