Just wanted to show what I made many years ago.
4 channels, almost impossible to make any service.
It actually sounds pretty good and there isn't any hum even though it's a mess.
Too many components
Moderators: pompeiisneaks, Colossal
Re: Too many components
What are the four channels?
Re: Too many components
There is
Clean, crunch, gain, high gain.
The topology of this amp comes from Engl Blackmore, but with a pair of 6L6GC and Kevin O'Connors GMX.
There is also fixed / cathode bias and pentode / triode switches.
-> Too much in a small chassis.
I would never had been able to make this without great help from ampage forum / Ray Ivers.
There was some serious problems in this project, oscillation etc...
Clean, crunch, gain, high gain.
The topology of this amp comes from Engl Blackmore, but with a pair of 6L6GC and Kevin O'Connors GMX.
There is also fixed / cathode bias and pentode / triode switches.
-> Too much in a small chassis.
I would never had been able to make this without great help from ampage forum / Ray Ivers.
There was some serious problems in this project, oscillation etc...
-
- Posts: 136
- Joined: Mon Nov 21, 2016 4:56 pm
Re: Too many components
holy sweet hell that's a tight bundle relays?