I have one of these here. I would love to rebuild it and use it, they are very nice stock. I have modded them a lot in the past and they can be even better that way. My problem is, one of the channel allocation switches is missing. A business partner and I pulled it to replace one for a customer some years ago. This one has sat here as a potential parts donor since then. That is all that is missing, the lever style channel selector switch. I still have the "knob" that goes with the missing switch, bit no switch.
Just wondering if anyone here would happen to have one or even know where to search... Maybe a particular forum that I could post this same request in. These MXs are Grammy award winning quality. I'd certainly like to get use out of it.
I posted similar in groupdiy as well.
Upon further review, the switch is the Line-Off-Mic switch for channel 4.
MX-35 or MX-10 Parts Search
Moderators: pompeiisneaks, Colossal
- dorrisant
- Posts: 2628
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
MX-35 or MX-10 Parts Search
You do not have the required permissions to view the files attached to this post.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: MX-35 or MX-10 Parts Search
Might see if these folks can lead you in the right direction:
https://www.electricandcompany.com/
https://www.electricandcompany.com/
- dorrisant
- Posts: 2628
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: MX-35 or MX-10 Parts Search
Thanks for that link. I reached out to them.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
-
- Posts: 4576
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: MX-35 or MX-10 Parts Search
Those look like what' could be replaced with what's called a Mega switch for guitar pickup selection.
They are made to be configured in many ways
They can be had at StewMac.com.
Also since it's only switching gain levels between Mic and line if you did not mind drilling a hole in that slot grove you could just use a mini toggle switch.
They are made to be configured in many ways
They can be had at StewMac.com.
Also since it's only switching gain levels between Mic and line if you did not mind drilling a hole in that slot grove you could just use a mini toggle switch.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
- dorrisant
- Posts: 2628
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: MX-35 or MX-10 Parts Search
I certainly don't want to deface this thing at all. So no mini switch.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
-
- Posts: 4576
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: MX-35 or MX-10 Parts Search
The bolt Ct to Ct on these types of switched is 1.600".
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!