Are these old klusons worth anything

cbass · Post by **cbass** » Mon Jan 30, 2023 2:41 am

Knobs are pretty rough but they still hold tune

Reeltarded · Post by **Reeltarded** » Mon Jan 30, 2023 6:50 am

a lot if you put nice keystones on them

single lines reverb similar condition

cbass · Post by **cbass** » Mon Jan 30, 2023 7:27 am

I may have some centrelab pots and some gold bell knobs from the same era.i can't rember what values .I'll have to look

cbass · Post by **cbass** » Mon Jan 30, 2023 7:39 am

Not centrelab. The pots are IRC 500k. I think the date code is 704.

cbass · Post by **cbass** » Mon Jan 30, 2023 2:55 pm

5 of the tuners worm gear is covered. On one of them you can see the end. Is this an early p90?

Reeltarded · Post by **Reeltarded** » Mon Jan 30, 2023 2:59 pm

No. Side or quarter profile. Is it a lap steel?

cbass · Post by **cbass** » Mon Jan 30, 2023 3:04 pm

Reeltarded wrote: ↑Mon Jan 30, 2023 2:59 pm No. Side or quarter profile. Is it a lap steel?

Yes it's a lap steel no identifying marks on it except it says Dave. So I've come to the conclusion it's the lapsteel used by David Gilmore on the DSOTM album

cbass · Post by **cbass** » Mon Jan 30, 2023 3:14 pm

Measures aprox 7.33k

cbass · Post by **cbass** » Mon Jan 30, 2023 3:19 pm

Jack plate

Reeltarded · Post by **Reeltarded** » Mon Jan 30, 2023 3:31 pm

Compare your baseplate and slugs to this

https://reverb.com/item/62914168-gibson ... gLw2vD_BwE

cbass · Post by **cbass** » Mon Jan 30, 2023 3:37 pm

Not the same the bottom bobbin on mine isn't squared off. It appears to be attached from the bottom to big metal plate the bridge sits on

Speed knobs not bells.

cbass · Post by **cbass** » Mon Jan 30, 2023 4:46 pm

I think this thing is a gibson century that someone "dave" Stripped the paint off of. So I reckon the pots date to 47 not 57

Reeltarded · Post by **Reeltarded** » Mon Jan 30, 2023 7:11 pm

it is all you had to do was post a complete pic lmao that is a p90 lift the bridge

cbass · Post by **cbass** » Mon Jan 30, 2023 7:38 pm

What fun is that. I actually thought it was a homemade unit. I received it in pieces. Once I started realizing all the parts were what gibsin uses. I was having thoughts of someone backing a truck over there 50s lp and salvaging the parts to make this thing. I was gonna sale the parts and never have to work again.

cbass · Post by **cbass** » Mon Jan 30, 2023 11:17 pm

I don't think it's a p90 but I don't know much. That wire splice is making me sick to my stomach. Looks like ot was originally black

The Amp Garage

Are these old klusons worth anything

Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything

Re: Are these old klusons worth anything