Shielding in Mexican EVH guitar.

Non-tube amp discussion to discuss music, girls, life, etc.

Moderators: pompeiisneaks, Colossal

Post Reply
Mark
Posts: 2982
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Shielding in Mexican EVH guitar.

Post by Mark »

My son wanted his own guitar about a year ago and I got him one. He wanted a EVH guitar, he’s not a big fan of EVH, he liked the colour of the guitar, the fact it only has a bridge pickup and it can go into dropped D with the flick of a switch.

He was a fan of Black Sabbath and I got him a Catanlynbread Sabbra Cadabra pedal. It actually sounded pretty good but it’s noisy. I thought the guitar was noisier that it should be.

Upon cracking the guitar open, I find the shielding job is pathetic. The paint is very thin, it’s not on the sides of the cavity where the earth wire and screw are. The lug which is screwed into the body is just flapping in the breeze.

The pickup wasn’t centred very well, (I did consider putting a F spaced Super Distortion pickup in the guitar), the setup was bad, etc. This is the second guitar from the initial purchase, the first guitar which I took back had a threaded thumb wheel screw in the Floyd Rose bridge. The outlet apologised saying their tech shouldn’t have missed it.
Nothing from Fender though.
IMG_8962.jpeg
IMG_8961.jpeg
You do not have the required permissions to view the files attached to this post.
Yours Sincerely

Mark Abbott
User avatar
martin manning
Posts: 13209
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

Re: Shielding in Mexican EVH guitar.

Post by martin manning »

Twenty years back my lad bought his first guitar, a Squire Strat. It had some shielding (conductive paint), but it still exhibited a lot of hum. I shielded the cavities and pick guard with copper foil from Stew Mac, and rewired it to eliminate ground loops. It was much improved after that.
User avatar
xtian
Posts: 7014
Joined: Mon Apr 19, 2010 8:15 pm
Location: NorCal
Contact:

Re: Shielding in Mexican EVH guitar.

Post by xtian »

I bought this guitar (EVH Striped) last year, and have since put hundreds of hours in, practicing and playing more than a dozen gigs with my EVH tribute band, VanHagar. I have been very pleased. I changed the stock pickup to a Seymour Duncan, then back again to the original.

The shielding has been no issue. The humbucker doesn't care, even with the high gain needed for Runnin' with the Devil or Eruption.

Here's live footage from our NYE show: https://youtu.be/yTmXcRBz3IA?si=roJphsQMY0rIDnXO

Hmm, not sure why video fails. Here's the URL with the https: youtu.be/yTmXcRBz3IA?si=roJphsQMY0rIDnXO
I build and repair tube amps. http://amps.monkeymatic.com
User avatar
ViperDoc
Posts: 1247
Joined: Tue Dec 24, 2019 2:21 am
Location: Idaho

Re: Shielding in Mexican EVH guitar.

Post by ViperDoc »

xtian wrote: Mon Jan 08, 2024 1:47 am I bought this guitar (EVH Striped) last year, and have since put hundreds of hours in, practicing and playing more than a dozen gigs with my EVH tribute band, VanHagar. I have been very pleased. I changed the stock pickup to a Seymour Duncan, then back again to the original.

The shielding has been no issue. The humbucker doesn't care, even with the high gain needed for Runnin' with the Devil or Eruption.

Here's live footage from our NYE show: https://youtu.be/yTmXcRBz3IA?si=roJphsQMY0rIDnXO

Hmm, not sure why video fails. Here's the URL with the https: youtu.be/yTmXcRBz3IA?si=roJphsQMY0rIDnXO
VERY WELL DONE, Aaron! Shredder!
Just plug it in, man.
Mark
Posts: 2982
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: Shielding in Mexican EVH guitar.

Post by Mark »

xtian wrote: Mon Jan 08, 2024 1:47 am I bought this guitar (EVH Striped) last year, and have since put hundreds of hours in, practicing and playing more than a dozen gigs with my EVH tribute band, VanHagar. I have been very pleased. I changed the stock pickup to a Seymour Duncan, then back again to the original.

The shielding has been no issue. The humbucker doesn't care, even with the high gain needed for Runnin' with the Devil or Eruption.

Here's live footage from our NYE show: https://youtu.be/yTmXcRBz3IA?si=roJphsQMY0rIDnXO

Hmm, not sure why video fails. Here's the URL with the https: youtu.be/yTmXcRBz3IA?si=roJphsQMY0rIDnXO
Sounds very good though I think you could have used more gain. A mate of mine knows a player who played through Eddie’s rig, and he remarked at the amount of gain Eddie used.

Did you carry out any mods to the guitar?
Brass block etc.
Yours Sincerely

Mark Abbott
User avatar
cbass
Posts: 4356
Joined: Sat Jul 23, 2011 6:17 pm
Location: Between Pomona & Bakersfield

Re: Shielding in Mexican EVH guitar.

Post by cbass »

Dang that's smokin 🔥
User avatar
didit
Posts: 990
Joined: Thu Sep 25, 2008 3:37 pm
Location: Canada

Re: Shielding in Mexican EVH guitar.

Post by didit »

Hmm yea --
xtian wrote: Mon Jan 08, 2024 1:47 am Here's live footage from our NYE show: https://youtu.be/yTmXcRBz3IA?si=roJphsQMY0rIDnXO

Hmm, not sure why video fails.
In deed, the yoob crew assumed the depth of their surveillance was inadequate and so broke a few things when tagging each copy with a unique crypto key. They now want to track who to whom. Only grab everything before that embedded question mark will restore an older style YT URL. And perhaps invoke the FullYouTube macro Phil so helpful added some while back::



That sparkly tiara was a "best in show" stylin' move.


Best ..
User avatar
xtian
Posts: 7014
Joined: Mon Apr 19, 2010 8:15 pm
Location: NorCal
Contact:

Re: Shielding in Mexican EVH guitar.

Post by xtian »

Mark wrote: Mon Jan 08, 2024 8:28 amDid you carry out any mods to the guitar?
Brass block etc.
Only added a kill switch. After I received my Kiesel Delos with Floyd Rose, I realized the FR that came with the EVH is lower quality--the tuning machines are not as nice and smooth as Kiesel's German FR.
I build and repair tube amps. http://amps.monkeymatic.com
Mark
Posts: 2982
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: Shielding in Mexican EVH guitar.

Post by Mark »

xtian wrote: Mon Jan 08, 2024 5:09 pm
Mark wrote: Mon Jan 08, 2024 8:28 amDid you carry out any mods to the guitar?
Brass block etc.
Only added a kill switch. After I received my Kiesel Delos with Floyd Rose, I realized the FR that came with the EVH is lower quality--the tuning machines are not as nice and smooth as Kiesel's German FR.
I’m ignorant of Floyd Rose bridges, in what way are they lower quality on the EVH guitar?
Yours Sincerely

Mark Abbott
User avatar
xtian
Posts: 7014
Joined: Mon Apr 19, 2010 8:15 pm
Location: NorCal
Contact:

Re: Shielding in Mexican EVH guitar.

Post by xtian »

Mark wrote: Tue Jan 09, 2024 10:43 pmI’m ignorant of Floyd Rose bridges, in what way are they lower quality on the EVH guitar?
Primarily, the metal and machining of the tuners. Much smoother and more precise on the better units.
I build and repair tube amps. http://amps.monkeymatic.com
Post Reply