She is up and sounding decent. Voltages are good
Voiced the normal channel tonestack with .022/.022/ 390p and 56k
Stock on the Bright channel. Did the tremolo cap mod to slow it a bit.
Added a Bias pot and bright caps on pull pot switches.
Tapped treble pot on normal channel seems to work ok, bright channel tapped pot cuts volume when turned up past noon.
May replace or try Martin's tapped pot alternative.
So far, (not much time spent playing) different than other Fender's I have played, although subtle, there's a nice variety of tones.
Bit darker than other Fender circuits.
D
BrownFace 6G16 build (Vibroverb)
Moderators: pompeiisneaks, Colossal
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
2 others liked this
BrownFace 6G16 build (Vibroverb)
You do not have the required permissions to view the files attached to this post.
Last edited by dcribbs1412 on Tue Apr 06, 2021 8:39 pm, edited 1 time in total.
Re: BrownFace 6G16 build
Looks great! Very nice!
Re: BrownFace 6G16 build
Very good looking build.
Mark
Mark
Re: BrownFace 6G16 build
D: what speaker(s) are you using?
Very nice amp....
i wanted to build one minus the tremolo
Very nice amp....
i wanted to build one minus the tremolo
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: BrownFace 6G16 build
Hi Joe
Used a EV12 for testing.
Had to make a few tweaks, she really is sounding nice now
Plugged into a 2x10 closed back cab and she came to life.
Imho the trem is not needed but a nice addition to the amp.
D
Last edited by dcribbs1412 on Mon Oct 05, 2020 3:11 am, edited 1 time in total.
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
2 others liked this
Re: BrownFace 6G16 build
Got it in a cab
Great sounding circuit, nice old school Fender tones.
Great sounding circuit, nice old school Fender tones.
You do not have the required permissions to view the files attached to this post.
Re: BrownFace 6G16 build
Wow that turned out great!