I have a couple amps that are giving me the business, one from unobtanium pots, the other from everything checks out but will not power on.
What specialty tools should I be using besides knife edged probes for tight space and needle sized points on the iron? There must be a trick to this teardown thing too. It's like Chinese handcuffs even on a Twin. Trapped! heh
PCB school
Moderators: pompeiisneaks, Colossal
-
Reeltarded
- Posts: 9960
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
PCB school
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
-
chief mushroom cloud
- Posts: 420
- Joined: Tue Jan 18, 2005 5:42 pm
- Location: Peenemunde CA
Re: PCB school
I always roll out the dumpster tool for these kinds of jobs.....the problems (and amp) magically disappear 
Don't overthink it. Just drink it.
-
Reeltarded
- Posts: 9960
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: PCB school
Aha! I should by a compactor pedal.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: PCB school
+10!chief mushroom cloud wrote:I always roll out the dumpster tool for these kinds of jobs.....the problems (and amp) magically disappear
Re: PCB school
The Chief is right. Don't waste your gift on these things .