2018 Monkeymatic Shasta Reverb
Moderators: pompeiisneaks, Colossal
Re: 2018 Monkeymatic Shasta Reverb
That’s a real beaut. The cabinet is gorgeous and I like the square ground
Re: 2018 Monkeymatic Shasta Reverb
Final faceplates arrived, along with power cord strain relief and cable clamps. All finished up. I ordered a custom Tuki cover also!
I noticed my fluorescent desk lamps caused a lot of RF noise in this circuit, so I put copper tape on the inside of the cabinet, and it completely blocks the RF. Very good!
I noticed my fluorescent desk lamps caused a lot of RF noise in this circuit, so I put copper tape on the inside of the cabinet, and it completely blocks the RF. Very good!
You do not have the required permissions to view the files attached to this post.
Last edited by xtian on Thu Feb 22, 2018 10:24 pm, edited 1 time in total.
I build and repair tube amps. http://amps.monkeymatic.com
Re: 2018 Monkeymatic Shasta Reverb
One more circuit shot.
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
-
- Posts: 894
- Joined: Mon May 24, 2010 11:29 pm
- Location: Bellingham, WA.
- Contact:
1 others liked this
Re: 2018 Monkeymatic Shasta Reverb
Really cool amp!
Re: 2018 Monkeymatic Shasta Reverb
Nicely built amp looks great.
Mark
Mark
Re: 2018 Monkeymatic Shasta Reverb
Great build, excellent work as usual.
Eric
1949 Zenith, Zenith Toggle Recoil, Zenith 55 & 440
1949 Zenith, Zenith Toggle Recoil, Zenith 55 & 440
- pompeiisneaks
- Site Admin
- Posts: 4222
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
1 others liked this
Re: 2018 Monkeymatic Shasta Reverb
Very clean, and love that Fir!
Tube junkie that aspires to become a tri-state bidirectional buss driver.