Hi.
I have Blackface Dual Showman from 1966 with Dual Showman output transformer 022897. I'm not sure is this originaly there or somebody replace that.
Shoud I also change the last resistor in NFB loop?
I measured 100R as it shoul be in Dual Showman, but with Showman output transformer should I change to stock 47R?
Is this an important thing or I can leave it like that.
Thanks!
Fender Dual Showman with Showman output transformer
Moderators: pompeiisneaks, Colossal
Fender Dual Showman with Showman output transformer
You do not have the required permissions to view the files attached to this post.
Re: Fender Dual Showman with Showman output transformer
It’s fine to leave it as is. There’s a bit more negative feedback, leading to a tighter response.
My band:- http://www.youtube.com/user/RedwingBand
-
Stevem
- Posts: 4576
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Fender Dual Showman with Showman output transformer
You will very likely never play it loud enough to hear the slight difference that it will make.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: Fender Dual Showman with Showman output transformer
Great!
Thank you guys for the help.
Thank you guys for the help.
Re: Fender Dual Showman with Showman output transformer
try a 100R in parallel to see what you like
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
Re: Fender Dual Showman with Showman output transformer
Where are you getting info on the 022897 ? I'm not finding that number on any Showman or Twin schematic. The "Showman Amp" or "Single Showman" should have an 8 Ohm output while the "Dual Showman" should have a 4 Ohm output.
Re: Fender Dual Showman with Showman output transformer
022897 - Vibrosonic reverb
mentioned in Twin 100w schematic - http://www.thevintagesound.com/ffg/sche ... _schem.jpg
mentioned in Twin 100w schematic - http://www.thevintagesound.com/ffg/sche ... _schem.jpg
