Sluckey's Dual Marshall

[Reeltarded]

Still have to watch last vid but its looking great. With the setup of dual input pairs you have the basis for the mother of all one-wire mods! lol

Love the through board tube mounting. The spacing is great for making this design even more prone to reject noise so the amp should be nearly silent. I have more than all that packed in a small box chassis with signal wires crossing output and other terrible things without any penalty.

Hurry up and let's hear this monster!

[pompeiisneaks]

Hehe sorry, had a busy weekend with an army buddy in town, and on top of it had to fix a friends HRD so I got slowed on the real build

~Phil

[Reeltarded]

HRD

I'd honestly rather slide off a cliff into thistle.

[pompeiisneaks]

Here's Video 5. I got the chassis almost completely done, and a lot of the board populated.




~Phil

[Guy77]

Hi Phil, as always thank you for the great work in keeping this site alive .

I was wondering were you got the blue fiber board for your Marshall build, I like it a lot. How thick is it?

Guy

[pompeiisneaks]

I got it from McMaster-Carr, it's Garolite, (FR4: https://www.mcmaster.com/#catalog/85345K31)

I bought 24"x24" 1/16" there are tons of other sizes and a few other colors, Black, Blue, Brown, and many sizes. I love this stuff so next order is likely to be the same in every way except a bigger baord to save money longer term. (36x48 is the largest they sell)

Thanks!

~Phil

[Guy77]

Thanks, I will check them out when I order again.

Guy

[dorrisant]

Nice work Phil!

Here's another source for the Garolite. Smaller pieces, more colors, even camo!?
https://www.fingertechrobotics.com/prod ... d=garolite

[pompeiisneaks]

Very cool, I'm very happy with the blue color, though, blue is my favorite

~Phil

[Reeltarded]

French Racing Blue? Of course..

[pompeiisneaks]

Well in my case it's not 'quite' the right color of blue, but I was in the infantry, the blue I love is "Infantry Blue"

https://en.wikipedia.org/wiki/Infantry_Blue_Cord

~Phil

[lpd]

I have one of these amps build by the late David Root. Footswitch with relay for the two channels and a dynacomp compressor on footswitch too. He also added a bright switch and a cap on a switch to add bite. Sounds great!

[sluckey]

It's been awhile. Any news?

[pompeiisneaks]

Sorry, have major family fun with Thanksgiving etc, and have a little left to finish. I'll post a video probably in December, I finished the board, and am ready to install it be haven't had time to touch it since.

Stalled but not forgotten

Phil

Sent from my LG-H932 using Tapatalk

[pompeiisneaks]

Finally got some work done today. Progress!




~Phil