Nice build Mark
are those 2 watts MF on the pre plates?
I had a bad relay....replaced it
like a different amp now
much louder in OD, and gain can get a little fizzy
Still like the amp...this is a cool circuit
Darin
Jubilee
Moderators: pompeiisneaks, Colossal
Re: Jubilee
Thanks Darin,
Yes those are 2w resistors, I used what I had on hand, was running low on certain 1w values.
Yes those are 2w resistors, I used what I had on hand, was running low on certain 1w values.
Re: Jubilee
Beautiful build Darin.
I'd be interested to know if you mod this in the future please.
Well done - impressive.
I'd be interested to know if you mod this in the future please.
Well done - impressive.
Why Aye Man
- Reeltarded
- Posts: 9962
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Jubilee
Your amp looks great! The Jube is one of the best sounding dirty amps ever. Dirtier than everything before it!:)dcribbs1412 wrote:Nice...someday I hope to have the room for a 4x12 cab.M Fowler wrote:Yeah that about where I'm at too for best tone into 412 cab with Vintage 30's.
I do not have a lot of experience with Marshall amps.
How does this circuit compare to other Marshall designs? ie 900, 2203
or higher gain amps. Next up is a SLO...after that I have a extra 100 watt
Marshall style OT that will be staring at me...wondering what to try
Darin
Make a 4 stage Marshall with that 100w OT. Too fun to not!
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: Jubilee
Thanks Bob and Reel
maybe some different clipping leds down the road...Bob if you know of any I can try let me know
I will look into a 4 gain stage for the 100watt OT
http://forum.metroamp.com/viewtopic.php?f=4&t=38424
Did this one work out?
Darin
I'm not aware of many mods to the jub, I kinda like the way it soundsBob S wrote:Beautiful build Darin.
I'd be interested to know if you mod this in the future please.
Well done - impressive.
maybe some different clipping leds down the road...Bob if you know of any I can try let me know
Cool ideaReeltarded wrote:
Make a 4 stage Marshall with that 100w OT. Too fun to not!
I will look into a 4 gain stage for the 100watt OT
http://forum.metroamp.com/viewtopic.php?f=4&t=38424
Did this one work out?
Darin
- Reeltarded
- Posts: 9962
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Jubilee
Plate drive is very cool. Either way I like 'em. The plate drive is more modern with the CF version sounding more As what you'd expect from an M amp.
The plate drive gets a highend reduction benefit. Still there but relaxed.
The plate drive gets a highend reduction benefit. Still there but relaxed.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.