Hot Rod Plexi 100w
Moderators: pompeiisneaks, Colossal
Hot Rod Plexi 100w
Another Hot Rod Plexi 100w (HRP) going together.
Watt's blank chassis punched and drilled whew lot of work but I enjoy doing that.
Watt's blank chassis punched and drilled whew lot of work but I enjoy doing that.
You do not have the required permissions to view the files attached to this post.
Re: Hot Rod Plexi 100w
Nice Mark - I likes that chassis size.
Seems I'm always stuck for real estate. Shoe horn & grease sorta.
Seems I'm always stuck for real estate. Shoe horn & grease sorta.
Why Aye Man
Re: Hot Rod Plexi 100w
Super nice, Mark. Where head cabs from?
I build and repair tube amps. http://amps.monkeymatic.com
Re: Hot Rod Plexi 100w
Bob there is a lot of room in this chassis.Bob S wrote:Nice Mark - I likes that chassis size.
Seems I'm always stuck for real estate. Shoe horn & grease sorta.
Re: Hot Rod Plexi 100w
The cabs are my custom order from Mojotone.xtian wrote:Super nice, Mark. Where head cabs from?
Re: Hot Rod Plexi 100w
I need to order more rear plates that have the effects loop holes
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
Re: Hot Rod Plexi 100w
Love the can caps on these amps
Out of interest, is this just a 100w version of the JTM45?
My JTM45 has got to be a desert island amp for me, it really is just a fine amp, clean or dirty and especially the large bit in between.
Marcus
Out of interest, is this just a 100w version of the JTM45?
My JTM45 has got to be a desert island amp for me, it really is just a fine amp, clean or dirty and especially the large bit in between.
Marcus
Re: Hot Rod Plexi 100w
Norburybrook
Looks like a JCM 800 type with 4 preamp tubes.
Mark builds some killer Marshall stuff this is one of those...
Looks like a JCM 800 type with 4 preamp tubes.
Mark builds some killer Marshall stuff this is one of those...
In theory, theory is the same as practice. In practice it's different.
Re: Hot Rod Plexi 100w
Like a Marshall JCM800 2203 100w with one more preamp tube for crazy high gain and two different switched boosts.
Sounds killer through a deep Mesa 212 cab with Vintage 30's or my favorite WGS Veteran 30.
Sounds killer through a deep Mesa 212 cab with Vintage 30's or my favorite WGS Veteran 30.
-
- Posts: 1377
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: Hot Rod Plexi 100w
Really nice drill and punch job Mark
looks like a lot of work.
Who does your faceplates?
D
looks like a lot of work.
Who does your faceplates?
D
Re: Hot Rod Plexi 100w
Colossal (Dave) and I got together on the faceplate design. Dave did the PDF for me and BNP laser did the plates.
It is a lot of punching and drilling but I enjoy that process of building.
It is a lot of punching and drilling but I enjoy that process of building.
Re: Hot Rod Plexi 100w
Hey, I remember that one! Looks great, as always Mark!
Re: Hot Rod Plexi 100w
Thanks Dave
Re: Hot Rod Plexi 100w
You give me the envy to build one, but I have no time to do it (damned).
2203/2204-ish/Deluxe Reverb
Re: Hot Rod Plexi 100w
sure you do